80000907 (5024.65) Convection Blower for Pacific Energy Mirage

Our aftermarket 80000907 (5024.65) Pacific Energy Mirage gas stove replacement blower uses 100% ball bearing construction to ensure smooth operation and long life.  Easily replaces the original blower that was included with the Mirage gas stoves.  Also replaces the blower in some of the newer model Pacific Energy wood stoves (FP25, FP30) depending on which year it was manufactured, so be sure to refer to your owner's manual for the correct part.  Replaces old sku #PERP.5024.65. Unlike the original blower that uses a oil soaked bronze sleeve bearing on the end cap, ours uses a high quality sealed ball bearing for smooth, quiet and reliable installation.

Please consult the compatibility guide below to ensure fitment.  This blower is constructed of high grade materials and is engineered to operate smoothly, efficiently and last a long time.  Blower comes with a 1 year replacement warranty. 

How to Replace the Blower on Mirage 18

• Disconnect the power cord from the unit.
• Remove 3 screws holding the side panel in place at the rear of the unit (Figure 49 on page 33).
• Disconnect the power connections (Figure 45).
• Remove the two (2) screws holding the fan in place (Figure 45) and remove the fan out of unit.
• Installation is the reverse of removal
• Please note that the original bracket needs to be transferred to the replacement blower.
• Mirage 18 Owner's Manual

How to Replace the Blower on Mirage 30

• Start by turning off the main gas supply to stove and disconnect the gas supply from the 1/2” flare fitting. (Figure 10). Also, disconnect the power cord from the unit.
• Remove 3 bolts (3/8” or Phillips) holding the side cladding panel on your right hand side (Figure 49).
• Remove the two (2) screws from the panel (Figure 33) and pull the fan out of unit. You will have to disconnect the wires from the fan before you can remove it completely.
• Connect wiring to the fan and insert into the stove through the side of the unit.
• Insert both screws into the fan access panel to attach the fan to the unit (Figure 33).
• Replace side cladding panel.
• Mirage 30 Owner's Manual

Please note: power cords and blower chassis diagonal support braces are NOT included with replacement blowers. 

If you're installing a blower for the first time, a blower kit may be required. Replacement blowers are intended to replace worn or defective blowers and do not include the components of a full blower kit. This blower may be used as a universal replacement blower, so please review dimensions before purchasing.  

For more information on the benefits of ball bearing blowers, read our How Does a Fireplace Blower Work? article.

Product Details

Also Known As

• PERP.5024.65