Playstation3 NEC / TOKIN replacement capacitor rated at 330uF 2.5v

If using for Playstation 3, please read the article at PSX Place to get yourself familiarized with the procedure. Usually, replacing one set of these near the RSX chip will resolve the issue but if not, more replacements may be needed. 

This is for a lot of 16 pieces

Model: 2R5TPE330M9

Source: https://www.psx-place.com/threads/research-experimental-nec-tokin-capacitors-replacement-ylod-fix.25260/

The NEC/TOKIN SMD Capacitor was manufactured by NEC "Formerly known as NEC/TOKIN", which its responsible for the current filtration and conversion, in order to stabalize and give the necessary current to the needed components.

These capacitors were used by Sony until the 65nm CELL/RSX manufacture era, due to they´re size and compact mounting space required, it could easily replace 4/6 Capacitors required to give the same uF "Micro-Farat" output, in a single package, these capacitors was used by other manufactures not just Sony, in a variety on PCB appliances such as Laptops/DVD Players between others, these Capacitors are notorious for failure due to the age/use and heat, thus loosing they´re original capacitance to a point they wont provide the necessary current anymore.

Reballing/Reflowing and the Hair-Drier only worked,because by heating the area to remove/reflow the CELL/RSX, you were not fixing the BGA with heat,but the action of heating the chips, where heating the NEC/TOKINs themselfs, thus restoring they´re original capacitive properties of the NEC/TOKINs,but depending on the amount of heat used, either it could last between a day to a few years.