Thinkscan Plus S4 products are a new generation of mid-to-high end DIY products based on Android system launched by THINKCAR, which can realize online upgrade of diagnostic software. Its main functions include not only OBD/EOBD standard protocol diagnosis, but more importantly, it has professional vehicle diagnostic software and maintenance software, which can perform a comprehensive diagnosis of all vehicle electronic control systems. Different series support different systems and functions.
5 System Diagnosis:
Engine Diagnose/Airbag Diagnose/ABS/Transmission Test/Body Control Module
Free 3 Opition Maintenance Service
You Can Choose 3 Resets Service as Free from 28 Maintenance Service
✅*Provide THREE Advanced Maintenance Service Mode Reset Function lifetime free.
✅*And the company provides 28 Maintenance Service Reset Reserved functions for users to buy when need.
✅*Though each Reset functions worths hundreds of pounds, you can access to one reset by subscribing at USD $29.95, and can use for 12 months.
The THINKCAR Thinkscan Plus S4 supports 28 commonly used special reset functions, allowing you to quickly access the vehicle system for various scheduled services, maintenance and reset performance, eliminating the need to reset the car after solving common problems Troubles.Listed some commonly used special reset services for your reference:
1.Oil Lamp Reset Service Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.
2.EPB Electronic Park Brake ResetIt is important in the maintenance of electronic braking system's safety and efficiency.
3.BAT battery service Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.
4.DPF Diesel Particulate Filter ResetSpecially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.
5.SAS Steering Angel Sensor ResetHelps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.
6.TPMS Tire Pressure Monitoring System ResetMakes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
7.Immobilizer Reset MATCH KEY
8.ABS Bleeding ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system.
9.Sunroof Reset The sunroof needs to be reset when the sunroof control unit have communication problem or changed.
10.Suspension Reset Try reset electronic suspension air ride with the massage system close all doors koeo flip through messages system go to suspension reset or on off.
11.Gearbox (Transmission )Reset Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.
12.AFS Headlamp Reset 'AFS' means Adaptive Front lighting System (at night with the Bi-Xenon headlights) it swivels either side, pressing that button means they stay pointing straight ahead and don't turn when you turn the steering wheel.
13.Injector Coding Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off.
14.Throttle Adaptation The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronically fuel injected car, a throttle position sensor and air flow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair.
15.Gear Learning The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.
16.EGR Reset
Reduce nitrogen oxides (NOx) in the exhaust gas and improve fuel economy at partial load.
17.A/F Reset
This function is applied to set or learn Air/Fuel ratio parameters.
18.Adblue Reset(Diesel Engine Exhaust Gas Filter)
After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required.
19.Airbag Reset
This function resets the airbag data to clear the airbag collision fault indicator.
20.Coolant Bleeding
Use this function to activate the electronic water pump before venting the cooling system.
21.AT Learning
This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift
22.Language Change
This function is used to change the system language of the vehicle central control panel.
23.Nox Sensor Reset
Nox sensor is a sensor used to detect the content of nitrogen oxides (Nox) in engine exhaust. lf the Nox fault is re-initialized and the Nox catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine Ecu.
24.ODO Reset
a) ODO reset is to copy,write, or rewrite the value of kilometers in the chip of odometer by using a car diagnostic computer and data cable, so that the odometer shows the actual mileage.
b)Usually when the mileage is not correct due to the damaged vehicle speed sensor or odometer failure, it is necessary to do ODO reset after maintenance.
25.Stop/Start Reset
This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware).
26.Seat Calibration
This function is applied to match the seats with memory function that are replaced and repaired.
27.Transport Mode
ln order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking up the door opening network, and disabling the remote control key, etc.At this time, the transport mode needs to be deactivated to restore the vehicle to normal.
28.Windows Calibration
This feature is designed to perform door window matching to recover ECU initial memory, and recover the automatic ascending and descending function of power window.
10 Full OBDII Functions
1️⃣Reading Codes
Show the detailed description of the Diagnostic Trouble Code (DTCs)
2️⃣Erasing Codes & Reset
Turns off Check Engine Light (MIL), clears codes and resets monitors.
3️⃣Data Stream
Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
4️⃣I/M Readiness Status
Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
5️⃣Read Live Data Stream
Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
6️⃣View Freeze Frame Data
Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
7️⃣O2 Sensor Test
Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
8️⃣On-Board Monitor Test
Retrieves and displays test results for emission-related powertrain components and systems.
9️⃣Read Vehicle Information
Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
🔟Component Test
Certain vehicle components can be actuated by commands sent from the scanner to test their operability
Thinkscan Plus S4 Characteristic Function
HEALTH REPORT GENERATE & SHARE
Ask for Help by sending the report to your mechanic or friend Give to your clients as part of their repair documentation A Reference for vehicle inspection and maintenance
Thinkscan Plus S4 Diagnostic Scanner Support 8 Languages
English, Russian, Spanish, Portuguese, French, Japanese, German,Italian
Support more than 93+ Car Brands:
For ASTONMARTIN ;For AUDI ;For BENZ ;For BMW ;For CHRYSLER ;For CITROEN ;For DAEWOO ;For FERRARI ;For FIAT ;For GM ;For HONDA ;For HYUNDAI ;For JPISUZU ;For KIA ;For LANDROVER ;For MASERATI ;For MAZDA ;For MITSUBISHI ;For NISSAN ;For OPEL ;For PEUGEOT ;For PORSCHE ;For RENAULT ;For ROVER ;For SAAB ;For SEAT ;For SGM ;For SKODA ;For SMART ;For SPRINTER ;For SSANGYONG For SUBARU ;For SUZUKI ;For TOYOTA ;For USA FORD ;For VOLVO ;For VW ;More...
Product Package List
1*Type-C Cable
2*Card Reader
3*Multilingual User Manual:
4*Packing Box
5.Thinkscan plus s4