Suitable for all later Porsche 911 models (996, 997, 991, 992).
NOTE: Some special edition models, may already have spacers fitted from the factory which will have to be removed before fitting this kit. Not suitable for use with 'centre lock' wheels.
Features...
- A full spacer kit including extra-long black bolts
- All bolts have 'floating' radius washer (correct for OE Porsche wheels)
- No wheel vibrations (unlike cheap spacers)
- Correct 170mm outer diameter to perfectly match Porsche hubs
- NOT to be confused with cheap kits!
NOTE: This kit does not include wheel locks. If you want a kit with matching locks please see our other items.
This kit includes...
2 x 15mm hub-centric spacers for rear wheels
2 x 7mm hub-centric spacers for front wheels
10 x Black extra-long 37mm hex bolts for use with 7mm spacers
10 x Black extra long 45mm hex bolts for use with 15mm spacers
1 x Fitting guide / instructions
This is everything you need to space your front and rear wheels. This combination of 7mm at the front and 15mm at the rear is a perfect, well proven set-up on Porsches. IMPORTANT: You must check wheel arch clearance before ordering.
The spacers
This kit includes two 7mm and two 15mm wheel spacers. These are precision machined from billet aluminium and perfectly balanced for a vibration free installation. The two 7mm spacers do not require a centre spigot (the raised collar in the middle), as the wheels can still centre on the original centre spigot. The two 15mm spacers are wider than the original spigot, so include a central spigot of their own. All our spacers are clear anodised for long lasting corrosion protection.
All four spacers have a 170mm outer diameter, which is an exact match for the original Porsche wheel hub diameter (see pictures). This makes a perfect fit. Other spacers may use a smaller outer diameter which makes an awkward fit - leaving a gap that is visible between wheel spokes!
The bolts
This kit includes black extra-long wheel bolts, with a Porsche style 'dished head' design. They feature the 'captive' (freely rotating) washers with 'radius' seats that you would find on an OE Porsche wheel bolt, and have the correct 19mm hex size. These bolts have the same 10.9 grade tensile strength as original Porsche wheel bolts.
Please measure the space available inside the arch lip and with respect to other suspension components BEFORE ORDERING. THIS PART IS THE BUYERS RESPONSIBILITY!
Fitment list...
Porsche 911 (996) (1997 - 2005)
Porsche 911 (997) (2005 - 2012)
Porsche 911 (991) (2012 - 2016)
Porsche 911 (992) (2016 +)
Porsche Boxster (986) (1996 - 2004)
Porsche Boxster (987) (2004 - 2012)
Porsche Boxster (981) (2012 - 2016)
Porsche Boxster 718 (982) (2016 +)
Porsche Cayman (987C) (2005 - 2012)
Porsche Cayman (981C) (2012 - 2016)
Porsche Cayman 718 (982C) (2016 +)
Porsche Panamera (970) (2009 - 2017)
Porsche Panamera (971) (2017 +)
Front Spacer Specifications
Spacer material: Billet aluminium
Spacer finish: Clear anodised
Spacer thickness: 7mm per spacer
Spacer overall diameter: 170mm
Spacer centre hole (hub centre diameter): 71.6mm
Spacer PCD of bolt holes: 130mm
Rear Spacer Specifications
Spacer material: Billet aluminium
Spacer finish: Clear anodised
Spacer thickness: 15mm per spacer
Spacer overall diameter: 170mm
Spacer centre hole (hub centre diameter): 71.6mm
Spacer PCD of bolt holes: 130mm
Front Bolt Specifications
Bolt thread size: M14 x 1.5
Bolt thread length: 37mm
Bolt overall head width: 27mm
Bolt overall length: 67mm (inc' the head)
Bolt seat type: Radius (Round shaped)
Bolt material: Heat treated carbon alloy steel
Bolt finish: Black zinc plated
Bolt spanner size: 19mm Hex
Rear Bolt Specifications
Bolt thread size: M14 x 1.5
Bolt thread length: 45mm
Bolt overall head width: 27mm
Bolt overall length: 75mm (inc' the head)
Bolt seat type: Radius (Round shaped)
Bolt material: Heat treated carbon alloy steel
Bolt finish: Black zinc plated
Bolt spanner size: 19mm Hex