eBay

T862 Irda Welder Infrared Heating Rework Station Usg

Technical Parameter:

Work bench size 410x316mm.

Rated voltage and frequency AC220-230v/AC110V 60/50Hz.

Complete machine power 1600W.

Preheating plate power 1500W.

Preheating plate size 280x270mm.

Preheating plate temperature adjustable 0-450℃.

Main Components.

Preheating plate main body 1.

Temperature sensor 1.

PCB board holder 1.

Power line 1.

User manual (compact disc) 1.

Main component function explanation:

Compare with T860,IRDA WELDER add a Rework 936 and a 936 switch,more concenient than before.

1. Adopt infrared weld technology which independent exploration.

2. Use infrared heat,it is easy to cut through,heat proportion piercing tradition weld machine with sirocco.

3. Easily operate.Just need one day training.Can operation this machine.

4. No need weld tools,it can weld all the component of 15x15-25x25mm.

5. This machine has 650W heating system.widely to 80x120mm.

6. Infrared heating no have sirocco flow. Don't impact perimeter small component.Can suitable for all of the.

component,especially Micro BGA component.

Parameter:

Working voltage : AC220V 50Hz.

Output power: 800W.

Temperature: 100℃-350℃.

Operation method.

1、Boot:

①Check the power source,wind the plug.

②Turn on the power source.Don’t use until pass check.Pand will display enactment value.When last time used.

③Installation the repair shell.Fix the line on the strip rack.Screw the light system height.Keep 20-30mm between light and welder machine.

④According to measurement of welder piece.Proprictily screw temperature.from60℃-350℃.When you strip 15×15mm piece.Choice temperature 240-300℃.When you strip 25×25mm piece.Choice temperature 300-350℃.The temperature come up to 350℃.The light system will shoot straightly.Please pay more attention to yourself control time.avoid burn out.

⑤Screw focus.The light system smallest diameter is 15mm .the biggest is 30mm.Normally keep 20-30mm.

⑥Turn on the two switches.They control warm-up plate and light system.

2、Dismantle and weld:

①Regulate temperature , make the chip focus.

②After suitable for timing, the tin is clicked and melted, take out the chip.

3、Weld the chip.

①Clean the pad.

②Coating help solder flux (should not thick too , can have first more thin ) and soldering tin ball.

③Wait to help the solder flux to volatilize into the flux, heat and totally melt to the tin ball , place correctly with the clip , aim at the chip to weld into the position.

④936 searing-iron.Open the swich and enactment temperature.

Caution!:

1、After use , imprison power immediately , make sure the light body cooling down,and place it in safety.After turning off the power switch.

2、Keep the blowing way without hindered, the light body is clean.

3、The support in good time is polished with the oil to lead the post , focus.

4、Disconnect the plug when you don’t use the it for a long time.

5、Operate carefully, take care.

Fri, 10 Jun 2022 09:39:19 GMT 637904795595063721 5C39737447DA64EA

SALES POLICY:

Your bid is a contract: place a bid only if you're serious about buying the item. If you are the winning bidder, you will enter into a legally biding contract to purchase the item. If payment is not received within 7 days, item may be offered to the next highest bidder or relisted at the seller's sole discretion.

RETURN POLICY :

We offer 90 days(used) or 180 days(new) free warranty (except consumables).we stand behind every product we sell.If you're not pleased with your purchase, we'll be happy to make an exchange or refund the product price less S&H within 7 days of your purchase. For any exchange or refund, we need the original receipt or a record of the purchase in our system, and the product must be in its original condition, including the box, packaging and all accessories. Shipping and handling charges are not refundable.

International Buyers:

We are NOT responsible for any custom duty or import tax. However, we will try our best to minimize it.

Wir sind NICHT für irgendeine Zollgebühr oder Importabgabe verantwortlich.

Nous ne sommes pas responsables de tout droit de douane ni taxe d'importation.

About US:

We are professional EBAY sales team and lots of ebay buyers very satisfied with our services. You can enjoy top-quality product and high-quality services from us.