FM Radio Receiver 76-108MHz Frequency Modification Wireless Radio Receiver

Instruction Download Link:DownLoad

 

Battery Not Included

 

 

1.Introduction:
It is an 76.0MHz-108.0MHz Wireless FM Radio Receiver DIY Kit. It has a built-in high-definition display LCD display screen which can clearly display the receiving frequency and it can store 22 radio stations, which is enough to meet your needs.

2.Feature:

1>.LCD Display FM Radio Receiver DIY Kit

2>.Work Voltage: DC 3.0V~5.0V

3>.Output impedance: 8ohm

4>.Output power: 5W

5>.Output channel: Mono for speaker and Dual channel for earphone

5>.Frequency: 87.0MHz~108.0MHz (Disable Campus Broadcasting Band)

6>.Frequency:76.0MHz~108.0MHz (Enable Campus Broadcasting Band)

7>.Equivalent noise: >=30dB

8>.Automatically search for radio stations

9>.Built-in 30-level digital volume adjustment

10>.Automatic memory function after power off

11>.Built-in rechargeable module

12>.Power saving mode with backlight off for 20 seconds

13>.Support speaker and earphone audio output

3.Use Methods:
1>.Keep press AUTO button to automatically search and store the radio stations that can be listened to.
2>.Automatically name searchable stations like P01,P02,P02 and so on.
3>.Press P+ and P- to switch saved stations.
4>.Press V+ and V- to adjust volume from V00 to V30.
5>.Switch Campus Broadcasting Band: Keep press V+ and V- before power ON and then turn ON work power switch. It means enable Campus Broadcasting Band if display C1 on LCD. It means disable Campus Broadcasting Band if display C0 on LCD.Available after restart.
6>.Enable backlight mode: Keep press P+ and P- before power ON and then turn ON work power switch. It means keep backlight ON if display B1 on LCD. It means the backlight will turn OFF after 20second if display B0 on LCD(This is the power saving mode).Available after restart.
7>.It can output audio from speaker and earphone jack. The speaker of the module does not work when the earphone is connected.

4.Component Listing:

 

5.Schematic Diagram:

 

6.Note:
1>.It cannot receive radio while it is charging.
2>.It is a wireless module. So do not use it in an environment with signal interference.
3>.Input charging voltage form micro USB on the bigger PCB.

7.Installation Tips:
1>.User needs to prepare the welding tool at first.
2>.Please be patient until the installation is complete.
3>.The package is DIY kit. It need finish install by user.
4>.The soldering iron can't touch the components for a long time(1.0 second), otherwise it will damage the components.
5>.Pay attention to the positive and negative of the components.
6>.Strictly prohibit short circuit.
7>.User must install the LED according to the specified rules. Otherwise some LED will not light.
8>.Install complex components preferentially.
9>.Make sure all components are in right direction and right place.
10>.It is strongly recommended to read the installation manual before starting installation!!!
11>.Please wear anti-static gloves or anti-static wristbands when installing electronic components.

8.Installation Steps (Please be patient install!!!):
1>.Step 1: Install 1pc 39Kohm Metal Film Resistor at R1.
2>.Step 2: Install 2pcs 10Kohm Metal Film Resistor at R2,R3.
3>.Step 3: Install 1pc SOP-16 IC LM4863 at U1.There is a mark on one end of the IC and there is a mark on PCB where the IC can place on.These two marks are corresponding to each other and are used to specify the installation direction of the IC Socket.
4>.Step 4: Install 1pc micro USB socket at J2.
5>.Step 5: Prepare 6pcs pin header.
6>.Step 6: Install 1pc Charging Module at J7 and fix by 6pcs pin header.
7>.Step 7: Remove black fixed block from 6pcs pin header and fix Charging Module.
8>.Step 8: Install 1pc 0.1uF Monolithic Capacitor at C2.
9>.Step 9: Install 1pc 1uF 50V Electrolytic Capacitor at C1.Pay attention to distinguish between positive and negative.The Longer pin is positive pole.
10>.Step 10: Install 1pc 3.5mm Audio Socket at J5.
11>.Step 11: Cut a pin from 16Pin Female Socket.
12>.Step 12: Install Female Socket at FM.Pay attention to the direction of the cut pin.
13>.Step 13: Install 1pc Self-locking Button at S6.
14>.Step 14: Install 5pcs 6*6*20mm Black Button at S1-S5.
15>.Step 15: Install 1pc Self-locking Button Cap on Self-locking Button.
16>.Step 16: Install 1pc Antenna at ANT.Note that the antenna should be installed on the front of the PCB.
17>.Step 17: Install 1pc 18650 Battery Box at J1,J3.Pay attention to the positive and negative.Red wire is positive pole.
18>.Step 18: Install 2pcs 15cm black Cable on speaker.
19>.Step 19: Connect speaker to PCB at SP. The speaker does not distinguish between positive and negative.
20>.Step 20: Install 1pc FM Audio Receiver on Female pins.Pay attention to the direction of the cut pin.
21>.Step 21: Tear off the protective film on the surface of the acrylic shell.
22>.Step 22: Install 4pcs M3*15mm Copper Pillar and 4pcs M3*10mm Screw on Acrylic bottom plate.
23>.Step 23: Fixed speaker on acrylic bottom plate by 4pcs M3*6mm Screw.
24>.Step 24: Install 3pcs M3*6mm Screw and 3pcs M3 Nut on Acrylic bottom plate.Note that the wire should not be placed between the PCB and the acrylic.
25>.Step 25: Fixed main PCB on acrylic bottom plate by 3pcs M3 Nut.Note that the wire should not be placed between the PCB and the acrylic.
26>.Step 26: Adjust the position of the battery box. Do not place the wires under the battery box. The wires can be moved to both ends of the battery box.
27>.Step 27: Fix other acrylic plate by 6pcs M3*6mm Screw and 6pcs M3 Nut.
28>.Step 28: Connect to power supply and enjoy the effect.

 

 

 

  • If you can't receive the product within 2 months (60 days), please contact with us,we promise to payback 100% of your money.
    We ensure our products work normally before post.If the products is broken before arrival to you,all you should do is taking a photo to show us our broken product.We promise to payback 100% of your money.

  • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
  • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
  • 1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
    2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
  • EBAY Managed Payment. But we only Accept your Ebay Address, please Make sure it's 100% right.
    Payment must be received in 5 business days of auction closing.
    Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
    Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.

* When you satisfied with our product and services please leave us positive feedback.

* If you have got the package, please confirm "Delivery on time" For us.

* If a problem occurs, contact us immediately with any email request.

* Just contact us using the " Ask the seller a question" link on eBay.

Am 13.06.2022 hat der Verkäufer die folgenden Angaben hinzugefügt:

DataCaciques