Manual injection molding machine for plastic. It is a great choice for starting your plastic parts business. An irreplaceable assistant in the workshop. You can quickly and easily make the necessary spare parts for your work. Doesn't require much effort, everything works smoothly and easily.
Please support our project with our Manual injection molding machine for plastic. We give each customer additional gifts in the form of granules and anti-sticking plastic lubricants for the initial work on our machines.
We produce all machines according to our drawings and projects, an individual approach is given for each machine. We manufacture all accessories on our own equipment. You can see our machines in the background.
The machine is made of quality materials: stainless steel, bronze, high-quality machine aluminum profile. Before painting, all the metal goes through a protective coating, after which it is opened with powder paint.
Each machine is assembled by hand.
The operation of this machine is designed for long-term operation without stopping at high temperatures, up to 350 ° С
- Electric heating element 110 - 220V, works in safe earthed mode. In AC power, the entire machine is grounded to ensure safe operation.
- Temperature of the heating element from 0 - 350 ° C Power consumption of the machine 150 Watt.
- The heating element custom-made for these machines for 220VAC has been tested for more than 5 hours of continuous operation, heated to 350 ° C, the heating element manufacturer's declared was 350 ° C, the temperature controller is from a reliable manufacturer.
- The increased wall of the stainless steel cylinder for melting the plastic does not allow the cylinder to cool down quickly, which is very important for the long operation of the machine and the uniform temperature distribution inside the cylinder.
After purchase, indicate your operating voltage of the network 110 or 220V so that we would install the necessary heating element for you.
- Machine dimensions
Height 600mm, length 670mm, width 180mm
cylinder 44 cm cubic
The maximum height of the mold can be inserted 125mm, the length of the mold is 200mm, the width is not limited as much as the space allows you to work.
- Plastics that can be used:
This machine can use primary and secondary plastic granules, shredded plastic and any plastic parts that fit into a 20mm diameter cylinder.
You can work with any plastic that melts below 350 degrees Celsius, except PVC.
Examples of some acceptable plastics:
HDPE, PET, LDPE, Acrylic, PP, ABS, Polycarbonate.
Plastics that cannot be handled with this machine:
PVC.
Press Form, matrix not included.
The machine is shipped in a wooden box.
The total weight of the machine with accessories is 11 kg. The machine is equipped with two nozzles with an exit opening of 3 and 4 mm, for different loads of materials. with a cylinder wrench, a test pellet for your tests.
We send all parcels by Express delivery.