eBay

3Pcs For Arduino Transmission Module PS2 Keyboard Driver Module Serial Port Ic

Feature:

Converts the PS2 protocol to TWI/IIC,UART,parallel interface.

Increase the key state detection. Wide range of applications.

Application:

Robot,Electronic products,and so on.

Brief introduction:

PS2 keyboard driver module, use a small microcontroller reads the PC PS2 keyboard key-press information, The values of the key will output by serial or parallel, for the use of other equipment. In a single chip microcomputer project system, main control MCU does not need to write the keyboard driver, read the key information directly, very convenient.

PS2 keyboard driver module, use a small microcontroller reads the PC PS2 keyboard key-press information, The values of the key will output by serial or parallel or TWI/IIC (Through the short circuit cap option), for the use of other equipment. In a single chip microcomputer project system, main control MCU does not need to write the keyboard driver, read the key information directly, very convenient.

Working principle:

PS2 keyboard driver module uses a piece of programed code of MCU as the controller, to read the state of PS2 keyboard keys. When the keyboard is pressed, the LED lights flashing on the PS2 keyboard driver module, at the same time through serial communication and parallel I/O port or TWI/IIC(Through the short circuit cap option),Keys will be output.

For example, Press "A" key,serial port output data 0x1c, parallel I/o port output 0x1c by D7-D0. The output scan code can refer to the back of the content.

Pop-up output. In addition, two sets of buttons, TTL output when there is no buttons to press the "0", and have a button to press the output "1", after the button pop-up restore "0" (each key on keyboard effectively. In addition to pause key.

Serial, parallel, TWI/IIC can work at the same time. If there is no connection from the machine on the IIC/TWI bus, please remove short-circuit cap module above. Otherwise, the module will not be able to work properly.

Matters need attention:

1.TWI/IIC address is 4. Modules for the host.

2.Do not use the TWI/IIC should be “IIC/TWI enable” Short circuit cap to remove. Otherwi se the module will not be able to work properly.

3. *UART Baud rate: 19200.

Performance parameter:

1>. working voltage:DC5V.

2>. Key information is sent out by serial(Baud rate 19200) and parallel.

3>. corresponding speed.

4>. apply to PC PS2 keyboard.

5>.Module size: 39.1mm(length)*31.2mm(width)*18mm(high).

Tue, 28 Jun 2022 10:24:33 GMT 637920374735950959 5C39737447DA64EA

SALES POLICY:

Your bid is a contract: place a bid only if you're serious about buying the item. If you are the winning bidder, you will enter into a legally biding contract to purchase the item. If payment is not received within 7 days, item may be offered to the next highest bidder or relisted at the seller's sole discretion.

RETURN POLICY :

We offer 90 days(used) or 180 days(new) free warranty (except consumables).we stand behind every product we sell.If you're not pleased with your purchase, we'll be happy to make an exchange or refund the product price less S&H within 7 days of your purchase. For any exchange or refund, we need the original receipt or a record of the purchase in our system, and the product must be in its original condition, including the box, packaging and all accessories. Shipping and handling charges are not refundable.

International Buyers:

We are NOT responsible for any custom duty or import tax. However, we will try our best to minimize it.

Wir sind NICHT für irgendeine Zollgebühr oder Importabgabe verantwortlich.

Nous ne sommes pas responsables de tout droit de douane ni taxe d'importation.

About US:

We are professional EBAY sales team and lots of ebay buyers very satisfied with our services. You can enjoy top-quality product and high-quality services from us.