 |
|
 |
|
|
M10 X 1.50 x 60 HEXAGONAL FLANGE BOLT SET SCREW DIN 6921
BRIGHT ZINC PLATED 10MM
|
M10 X 1.50 PITCH X 60MM LONG HEXAGONAL FLANGE BOLTS
| THESE ARE MADE FROM HIGH TENSILE STEEL AND
ARE BRIGHT ZINC COATED TO PROTECT AGAINST THE RAIN. |
|
LISTING PRICE IS PER BOLT, IF YOU REQUIRE MORE THAT 1 BOLT , SELECT QUANTITY IN BOX AT TOP OF LISTING
FLAT RATE POST IF YOU ORDER 1 OR 50
|
| To get the correct length you need on
this bolt - measure from under the head to end of bolt -60mm |
|
SUITABLE FOR - MARINE, GARDEN, OUTDOOR,
BIKES, CARS, GO KARTS, MOTORBIKES, JET SKI, MOST CARS, VAN TRAILER, ENGINE,
CLASSIC CARS, SELF BUILD CARS, CLASSIC CARS, RESTORATION, BIKES
BMX-MOUNTAIN-QUOD-TRIKE, MOST CARS FORD VAUXHALL ETC ETC.
|
|
|
| ASME | ≈B18.2.3.4M |
|---|
| EN | ≈1665 |
|---|
| ISO | ≈4162 |
|---|
| DIN | 6921 |
|---|
| b (min.) | 26 |
|---|
| dc (max.) | 22.3 |
|---|
| k (max.) | 9.2 |
|---|
| P | 1.50 |
|---|
| s | 15 |
|---|
| Diameter (d-D) | M10 |
|---|
| Length (L) (mm) | 60 |
|---|
| Info | Specific features of hexagon bolts with flange: - The flange enables built up forces under the bolt head to be spread over a larger area, consequently resulting in lower surface pressure.
- Large (oversized) holes and/or tooling holes can be covered by the flange.
- Washers are not necessary.
|
|---|
| Class | 10.9 |
|---|
| Driving features | Hexagon |
|---|
| Head shape | Hexagon head |
|---|
| Material | Steel |
|---|
| Thread direction | Right |
|---|
| Surface treatment | Zinc plated |
|---|
| Thread | Metric thread |
|---|
| Info | - Warning: electroplating of these products may cause hydrogen embrittlement.
|
|---|
|
|
|
|
I WILL POST ANY WHERE IN THE WORLD (EXCEPT RUSSIA) PLEASE EMAIL ME BEFORE BIDDING FOR SHIPPING COSTS IF YOU ARE UNSURE
|
|
|
|
|
 |
|
 |
|
