Disponibilité: Article en stock Livraison: Sous 24/48 heures
Garantie: 2 ans pièces & main-d'oeuvre
En Savoir Plus :
AKG - C5 - Microphone de chant electret cardioïde
Dédié à la voix, le C5 est un micro à condensateur (nécessitant une alimentation +48v) cardioïde.
Capsule plaquée or 24 carats.
Grille pour filtrer les pops et le vent.
Suspension élastique interne.
Livré avec housse et adaptateur pour pied.
Spécifications :
Directivité Cardioïde.
lage de fréquence de 65 à 20000 Hz.
Sensibilité 4mV/Pa (-48 dBV).
Pression SPL max avec un taux de distorsion de 1 à 3 % 140 à 145 dB.
Niveau de bruit équivalent 25 dB-A.
Impedance =<200 Ohms
AKG - C5
C5
224,00 €
Availability: Available in stock Processing time: Under 24/48 hours
Guaranty: 2 years by manufacturer
More info
AKG - C5
The AKG C5 Condenser vocal microphone (C-5). Rugged vocal condenser, built for the stage.
The AKG C5 professional condenser vocal microphone will make your voice cut through the loudest mix - on any stage. Its cardioid polar pattern ensures maximum gain before feedback and has been optimized for use with in-ear monitor systems. The gold plated transducer case does not only give the microphone a sophisticated esthetic touch but also makes the transducer extremely resistant to corrosion and humidity. The result is superior audio performance.
The main features of the AKG C5 include :
Condenser vocal microphone for onstage use
XLR connector module with 24-carat gold plated pins
24-carat gold plated transducer case for optimum conductivity and resistance to corrosion and humidity
Spring steel wire-mesh grill for extreme ruggedness incl. reliable control of pops and wind noise
SA 45 Stand adapter, PB 1000 Presence boost adapter and microphone bag included
Polar pattern: cardioid
Frequency range: 65 Hz to 20 kHz
Sensitivity: 4 mV/Pa (-48 dBV )
Max. SPL: 140 / 145 dB SPL (for 1% / 3% THD)
Equivalent noise level: 25 dB-A
Signal/noise ratio (A-weighted): 69 dB
Impedance: <= 200 ohms
Recommended load impedance: >= 2.000 ohms
Current consumption: typ. 4.3 mA
Power requirement: 9 to 52 V phantom power to DIN 45596
Connector: 3-pin XLR
Finish: matte grayish blue
AKG - C5
C5
224,00 €
Availability: Available in stock Processing time: Under 24/48 hours
Guaranty: 2 years by manufacturer
Más
AKG - C5
The AKG C5 Condenser vocal microphone (C-5). Rugged vocal condenser, built for the stage.
The AKG C5 professional condenser vocal microphone will make your voice cut through the loudest mix - on any stage. Its cardioid polar pattern ensures maximum gain before feedback and has been optimized for use with in-ear monitor systems. The gold plated transducer case does not only give the microphone a sophisticated esthetic touch but also makes the transducer extremely resistant to corrosion and humidity. The result is superior audio performance.
The main features of the AKG C5 include :
Condenser vocal microphone for onstage use
XLR connector module with 24-carat gold plated pins
24-carat gold plated transducer case for optimum conductivity and resistance to corrosion and humidity
Spring steel wire-mesh grill for extreme ruggedness incl. reliable control of pops and wind noise
SA 45 Stand adapter, PB 1000 Presence boost adapter and microphone bag included
Polar pattern: cardioid
Frequency range: 65 Hz to 20 kHz
Sensitivity: 4 mV/Pa (-48 dBV )
Max. SPL: 140 / 145 dB SPL (for 1% / 3% THD)
Equivalent noise level: 25 dB-A
Signal/noise ratio (A-weighted): 69 dB
Impedance: <= 200 ohms
Recommended load impedance: >= 2.000 ohms
Current consumption: typ. 4.3 mA
Power requirement: 9 to 52 V phantom power to DIN 45596
Connector: 3-pin XLR
Finish: matte grayish blue
AKG - C5
C5
224,00 €
Availability: Available in stock Processing time: Under 24/48 hours
Guaranty: 2 years by manufacturer
Produktinfos
AKG - C5
The AKG C5 Condenser vocal microphone (C-5). Rugged vocal condenser, built for the stage.
The AKG C5 professional condenser vocal microphone will make your voice cut through the loudest mix - on any stage. Its cardioid polar pattern ensures maximum gain before feedback and has been optimized for use with in-ear monitor systems. The gold plated transducer case does not only give the microphone a sophisticated esthetic touch but also makes the transducer extremely resistant to corrosion and humidity. The result is superior audio performance.
The main features of the AKG C5 include :
Condenser vocal microphone for onstage use
XLR connector module with 24-carat gold plated pins
24-carat gold plated transducer case for optimum conductivity and resistance to corrosion and humidity
Spring steel wire-mesh grill for extreme ruggedness incl. reliable control of pops and wind noise
SA 45 Stand adapter, PB 1000 Presence boost adapter and microphone bag included
Polar pattern: cardioid
Frequency range: 65 Hz to 20 kHz
Sensitivity: 4 mV/Pa (-48 dBV )
Max. SPL: 140 / 145 dB SPL (for 1% / 3% THD)
Equivalent noise level: 25 dB-A
Signal/noise ratio (A-weighted): 69 dB
Impedance: <= 200 ohms
Recommended load impedance: >= 2.000 ohms
Current consumption: typ. 4.3 mA
Power requirement: 9 to 52 V phantom power to DIN 45596
Connector: 3-pin XLR
Finish: matte grayish blue
AKG - C5
C5
224,00 €
Availability: Available in stock Processing time: Under 24/48 hours
Guaranty: 2 years by manufacturer
Dettagli
AKG - C5
The AKG C5 Condenser vocal microphone (C-5). Rugged vocal condenser, built for the stage.
The AKG C5 professional condenser vocal microphone will make your voice cut through the loudest mix - on any stage. Its cardioid polar pattern ensures maximum gain before feedback and has been optimized for use with in-ear monitor systems. The gold plated transducer case does not only give the microphone a sophisticated esthetic touch but also makes the transducer extremely resistant to corrosion and humidity. The result is superior audio performance.
The main features of the AKG C5 include :
Condenser vocal microphone for onstage use
XLR connector module with 24-carat gold plated pins
24-carat gold plated transducer case for optimum conductivity and resistance to corrosion and humidity
Spring steel wire-mesh grill for extreme ruggedness incl. reliable control of pops and wind noise
SA 45 Stand adapter, PB 1000 Presence boost adapter and microphone bag included
Polar pattern: cardioid
Frequency range: 65 Hz to 20 kHz
Sensitivity: 4 mV/Pa (-48 dBV )
Max. SPL: 140 / 145 dB SPL (for 1% / 3% THD)
Equivalent noise level: 25 dB-A
Signal/noise ratio (A-weighted): 69 dB
Impedance: <= 200 ohms
Recommended load impedance: >= 2.000 ohms
Current consumption: typ. 4.3 mA
Power requirement: 9 to 52 V phantom power to DIN 45596