RME - HDSPe AIO Pro - Interface audio PCI Express 30 canaux

Successeur de la populaire HDSPe AIO, la version PRO fournit aux utilisateurs professionnels du studio et du broadcast le même nombre de canaux dans une version entièrement retravaillée, à la pointe de la technologie.

La HDSPe AIO Pro est basée autour des références AK5572 et AK4490, utilisées dans les convertisseurs haut de gamme ADI-2 Pro. Les entrées analogiques utilisent aussi le circuit de l'ADI-2 Pro. Les sorties ont également été améliorées avec des niveaux de référence supplémentaires, pour permettre une intégration plus facile avec n'importe quel système audio. La HDSPe AIO Pro possède une atténuateur sur la section de sortie, permettant d'augmenter le rapport signal sur bruit et baisser l'impédance de sortie pour des niveaux de références faibles.

La HDSPe AIO Pro est équipée d'une nouvelle sortie casque, extrêmement transparente et puissante. Grâce à l'utilisation de relais de coupure, il n'y a pas de craquements indésirables sur la sortie casque lors de la bascule entre les sorties.

Toutes les entrées et sorties peuvent être utilisées simultanément, même le SPDIF (RCA) et AES/EBU (XLR). Bien sûr, le logiciel TotalMix est intégré pour une flexibilité de routing inégalée ainsi que l'horloge SteadyClock FS, permettant une suppresion maximum du Jitter pour les horloges externes Le HDSPe AIO Pro peut être utilisé avec l'option TCO pour la synchronisation au timecode (LTC/video).

• Entrée et sortie stéréo analogiques symétriques, 24-bit/192kHz
• Entrée et sortie ADAT, jusqu'à 192kHz via S/MUX4
• Entrée et sortie SPDIF, jusqu'à 192kHz
• Entrée et sortie AES/EBU, jusqu'à 192kHz
• Sortie casque haute puissance, avec convertisseur séparé
• Entrée et sortie MIDI
• DIGICheck, outil unique de mesure et d'analyse
• TotalMix FX : mixer 760 canaux et résolution interne de 42 bit
• PCI Express natif - pas de pont PCI vers PCI Express utilisé
• Sorties avec relais de coupure

La HDSPe AIO Pro est livrée avec un câble éclaté analogique en RCA/phono (jack pour la sortie casque) asymétrique. Un éclaté en XLR avec prise Jack Neutrik à vérrouillage est disponible en option pour une utilisation en symétrique.

Caractéristiques :

•     192 kHz / 24 bits
•     Convertisseurs ADI-2 Pro AK5572 et 2 x AK4490
•     Toute la gamme d'entrées analogiques repose sur la conception du circuit de l'ADI-2 Pro (+24 / +19 / +13 / +4 dBu)
•     Relais de Mute également pour les sorties XLR/RCA afin d'éviter le bruit lors de la mise sous tension de l'ordinateur
•     Niveau de référence pour les sorties : symétrique : +24 / +19 / +13 / +4 dBu, asymétrique +19 / +13 / +4 / -2 dBu
•     SteadyClock FS
•     Niveau de sortie casque : +19 dBu / +7 dBu (haute / basse puissance)
•     Connecteurs : 2x D-Sub standard pour câble épanoui avec 2x entrées ligne RCA, 2x sorties ligne RCA, prise casque stéréo jack 6,3 mm, AES/EBU, SPDIF coaxial, entrée et sortie MIDI, entrée et sortie optique ADAT / SPDIF
•     Module Word Clock (WCM) et câble épanoui avec connecteurs XLR symétriques disponibles en option (non inclus)

RME - HDSPe AIO Pro - 30 Channel PCI Express Audio Interface

Successor to the popular HDSPe AIO, the PRO version provides professional studio and broadcast users with the same number of channels in a completely redesigned, state-of-the-art version.

The HDSPe AIO Pro is based around the AK5572 and AK4490 references, used in the high-end ADI-2 Pro converters. The analog inputs also use the circuit of the ADI-2 Pro. The outputs have also been enhanced with additional reference levels, to allow easier integration with any audio system. The HDSPe AIO Pro has an attenuator on the output section, allowing the signal to noise ratio to be increased and the output impedance to be lowered for low reference levels.

The HDSPe AIO Pro is equipped with a new, extremely transparent and powerful headphone output. Thanks to the use of mute relays, there are no unwanted crackles on the headphone output when switching between outputs.

All inputs and outputs can be used simultaneously, even SPDIF (RCA) and AES/EBU (XLR). Of course, TotalMix software is integrated for unparalleled routing flexibility as well as SteadyClock FS, allowing maximum jitter suppression for external clocks. The HDSPe AIO Pro can be used with the TCO option for timecode synchronization ( LTC/video).

•     Balanced analog stereo input and output, 24-bit/192kHz
•     ADAT input and output, up to 192kHz via S/MUX4
•     SPDIF input and output, up to 192kHz
•     AES/EBU input and output, up to 192kHz
•     High power headphone output, with separate converter
•     MIDI input and output
•     DIGICheck, a unique measurement and analysis tool
•     TotalMix FX: 760 channel mixer and 42 bit internal resolution
•     Native PCI Express - no PCI to PCI Express bridge used
•     Outputs with cut-off relay

The HDSPe AIO Pro is supplied with an unbalanced analog RCA/phono (jack for headphone output) split cable. An XLR split with locking Neutrik jack is available as an option for balanced use.

Features:

• 192 kHz / 24 bit
•      ADI-2 Pro AK5572 and 2 x AK4490 converters
•      The entire analog input range is based on the circuit design of the ADI-2 Pro (+24 / +19 / +13 / +4 dBu)
•      Mute relay also for XLR/RCA outputs to avoid noise when powering up the computer
•      Reference level for outputs: balanced: +24 / +19 / +13 / +4 dBu, unbalanced +19 / +13 / +4 / -2 dBu
•      SteadyClock FS
•      Headphone output level: +19 dBu / +7 dBu (high / low power)
•      Connectors: 2x D-Sub standard for breakout cable with 2x RCA line in, 2x RCA line out, 6.3mm stereo headphone jack, AES/EBU, coaxial SPDIF, MIDI in and out, ADAT/SPDIF optical in and out
•      Word Clock Module (WCM) and breakout cable with balanced XLR connectors optionally available (not included)

RME - HDSPe AIO Pro - 30 Channel PCI Express Audio Interface

Successor to the popular HDSPe AIO, the PRO version provides professional studio and broadcast users with the same number of channels in a completely redesigned, state-of-the-art version.

The HDSPe AIO Pro is based around the AK5572 and AK4490 references, used in the high-end ADI-2 Pro converters. The analog inputs also use the circuit of the ADI-2 Pro. The outputs have also been enhanced with additional reference levels, to allow easier integration with any audio system. The HDSPe AIO Pro has an attenuator on the output section, allowing the signal to noise ratio to be increased and the output impedance to be lowered for low reference levels.

The HDSPe AIO Pro is equipped with a new, extremely transparent and powerful headphone output. Thanks to the use of mute relays, there are no unwanted crackles on the headphone output when switching between outputs.

All inputs and outputs can be used simultaneously, even SPDIF (RCA) and AES/EBU (XLR). Of course, TotalMix software is integrated for unparalleled routing flexibility as well as SteadyClock FS, allowing maximum jitter suppression for external clocks. The HDSPe AIO Pro can be used with the TCO option for timecode synchronization ( LTC/video).

•     Balanced analog stereo input and output, 24-bit/192kHz
•     ADAT input and output, up to 192kHz via S/MUX4
•     SPDIF input and output, up to 192kHz
•     AES/EBU input and output, up to 192kHz
•     High power headphone output, with separate converter
•     MIDI input and output
•     DIGICheck, a unique measurement and analysis tool
•     TotalMix FX: 760 channel mixer and 42 bit internal resolution
•     Native PCI Express - no PCI to PCI Express bridge used
•     Outputs with cut-off relay

The HDSPe AIO Pro is supplied with an unbalanced analog RCA/phono (jack for headphone output) split cable. An XLR split with locking Neutrik jack is available as an option for balanced use.

Features:

• 192 kHz / 24 bit
•      ADI-2 Pro AK5572 and 2 x AK4490 converters
•      The entire analog input range is based on the circuit design of the ADI-2 Pro (+24 / +19 / +13 / +4 dBu)
•      Mute relay also for XLR/RCA outputs to avoid noise when powering up the computer
•      Reference level for outputs: balanced: +24 / +19 / +13 / +4 dBu, unbalanced +19 / +13 / +4 / -2 dBu
•      SteadyClock FS
•      Headphone output level: +19 dBu / +7 dBu (high / low power)
•      Connectors: 2x D-Sub standard for breakout cable with 2x RCA line in, 2x RCA line out, 6.3mm stereo headphone jack, AES/EBU, coaxial SPDIF, MIDI in and out, ADAT/SPDIF optical in and out
•      Word Clock Module (WCM) and breakout cable with balanced XLR connectors optionally available (not included)

RME - HDSPe AIO Pro - 30 Channel PCI Express Audio Interface

Successor to the popular HDSPe AIO, the PRO version provides professional studio and broadcast users with the same number of channels in a completely redesigned, state-of-the-art version.

The HDSPe AIO Pro is based around the AK5572 and AK4490 references, used in the high-end ADI-2 Pro converters. The analog inputs also use the circuit of the ADI-2 Pro. The outputs have also been enhanced with additional reference levels, to allow easier integration with any audio system. The HDSPe AIO Pro has an attenuator on the output section, allowing the signal to noise ratio to be increased and the output impedance to be lowered for low reference levels.

The HDSPe AIO Pro is equipped with a new, extremely transparent and powerful headphone output. Thanks to the use of mute relays, there are no unwanted crackles on the headphone output when switching between outputs.

All inputs and outputs can be used simultaneously, even SPDIF (RCA) and AES/EBU (XLR). Of course, TotalMix software is integrated for unparalleled routing flexibility as well as SteadyClock FS, allowing maximum jitter suppression for external clocks. The HDSPe AIO Pro can be used with the TCO option for timecode synchronization ( LTC/video).

•     Balanced analog stereo input and output, 24-bit/192kHz
•     ADAT input and output, up to 192kHz via S/MUX4
•     SPDIF input and output, up to 192kHz
•     AES/EBU input and output, up to 192kHz
•     High power headphone output, with separate converter
•     MIDI input and output
•     DIGICheck, a unique measurement and analysis tool
•     TotalMix FX: 760 channel mixer and 42 bit internal resolution
•     Native PCI Express - no PCI to PCI Express bridge used
•     Outputs with cut-off relay

The HDSPe AIO Pro is supplied with an unbalanced analog RCA/phono (jack for headphone output) split cable. An XLR split with locking Neutrik jack is available as an option for balanced use.

Features:

• 192 kHz / 24 bit
•      ADI-2 Pro AK5572 and 2 x AK4490 converters
•      The entire analog input range is based on the circuit design of the ADI-2 Pro (+24 / +19 / +13 / +4 dBu)
•      Mute relay also for XLR/RCA outputs to avoid noise when powering up the computer
•      Reference level for outputs: balanced: +24 / +19 / +13 / +4 dBu, unbalanced +19 / +13 / +4 / -2 dBu
•      SteadyClock FS
•      Headphone output level: +19 dBu / +7 dBu (high / low power)
•      Connectors: 2x D-Sub standard for breakout cable with 2x RCA line in, 2x RCA line out, 6.3mm stereo headphone jack, AES/EBU, coaxial SPDIF, MIDI in and out, ADAT/SPDIF optical in and out
•      Word Clock Module (WCM) and breakout cable with balanced XLR connectors optionally available (not included)

RME - HDSPe AIO Pro - 30 Channel PCI Express Audio Interface

Successor to the popular HDSPe AIO, the PRO version provides professional studio and broadcast users with the same number of channels in a completely redesigned, state-of-the-art version.

The HDSPe AIO Pro is based around the AK5572 and AK4490 references, used in the high-end ADI-2 Pro converters. The analog inputs also use the circuit of the ADI-2 Pro. The outputs have also been enhanced with additional reference levels, to allow easier integration with any audio system. The HDSPe AIO Pro has an attenuator on the output section, allowing the signal to noise ratio to be increased and the output impedance to be lowered for low reference levels.

The HDSPe AIO Pro is equipped with a new, extremely transparent and powerful headphone output. Thanks to the use of mute relays, there are no unwanted crackles on the headphone output when switching between outputs.

All inputs and outputs can be used simultaneously, even SPDIF (RCA) and AES/EBU (XLR). Of course, TotalMix software is integrated for unparalleled routing flexibility as well as SteadyClock FS, allowing maximum jitter suppression for external clocks. The HDSPe AIO Pro can be used with the TCO option for timecode synchronization ( LTC/video).

•     Balanced analog stereo input and output, 24-bit/192kHz
•     ADAT input and output, up to 192kHz via S/MUX4
•     SPDIF input and output, up to 192kHz
•     AES/EBU input and output, up to 192kHz
•     High power headphone output, with separate converter
•     MIDI input and output
•     DIGICheck, a unique measurement and analysis tool
•     TotalMix FX: 760 channel mixer and 42 bit internal resolution
•     Native PCI Express - no PCI to PCI Express bridge used
•     Outputs with cut-off relay

The HDSPe AIO Pro is supplied with an unbalanced analog RCA/phono (jack for headphone output) split cable. An XLR split with locking Neutrik jack is available as an option for balanced use.

Features:

• 192 kHz / 24 bit
•      ADI-2 Pro AK5572 and 2 x AK4490 converters
•      The entire analog input range is based on the circuit design of the ADI-2 Pro (+24 / +19 / +13 / +4 dBu)
•      Mute relay also for XLR/RCA outputs to avoid noise when powering up the computer
•      Reference level for outputs: balanced: +24 / +19 / +13 / +4 dBu, unbalanced +19 / +13 / +4 / -2 dBu
•      SteadyClock FS
•      Headphone output level: +19 dBu / +7 dBu (high / low power)
•      Connectors: 2x D-Sub standard for breakout cable with 2x RCA line in, 2x RCA line out, 6.3mm stereo headphone jack, AES/EBU, coaxial SPDIF, MIDI in and out, ADAT/SPDIF optical in and out
•      Word Clock Module (WCM) and breakout cable with balanced XLR connectors optionally available (not included)