You get one RDX K Headlight Switch.
Bolt On Bits are please announce the arrival of the RDX K switch, a stylish, affordable, switch solution.
The RDX K switch comes in a variety of functions and switch legends that are screen printed not stickers that could degrade with time.
Please see our other listings for other Functions, Surrounds, Blanks, Panels; we have:
Click on picture to go to the listing
Plain OFF/ON
Spot Lamps OFF/ON
Heated Rear Window OFF/ON
Heated Front Screen OFF/ON
Heated Seat OFF/ON
Heated Mirror OFF/ON
Front Fog lamps OFF/ON
Rear Fog lamps OFF/ON
Hazard OFF/ON will require relays
Fan OFF/ON
Beacon OFF/ON
Work lamp OFF/ON
Map Reading Light OFF/ON
Interior Light OFF/ON
Rear Wiper OFF/ON
Rear Washer OFF/(ON) Momentary
Horn OFF/(ON) Momentary
Compressor OFF/ON
Front Diff Lock OFF/ON
Rear Diff Lock OFF/ON
Sidelight/Headlamps OFF/ON/ON
Winch (ON) / OFF / (ON)
Electric Window (ON) / OFF / (ON)
NEW Winch Symbol (ON) / OFF / (ON)
Optional Trim panels
'Ends'
'Middles'
Single Switch panel
Switch operation OFF/ON/ON
Switch will normally be in the off position, when switch is pressed once sidelights are switched on, a further press of the switch will turn headlights on.
The switch is black plastic, with a white Legend window with Black Screen printed symbol we also have a plain white Legend window with no screen printing.
The white Legend window is illuminated by a green LED.
This can be wired like other dashboard illumination to illuminate the Legend for easier locating in dark situations.
The 'On' operation can be noted by an Orange LED 'Slit'.
This colour scheme is similar to Late Defenders such as Td5 & Tdci models.
Rated as a 12v DC switch
Switching load is 20amp max at 12volts, we recommend the switch is used to 'switch' on relays or low load devices to prolong the life of the switch,it also good practice to use relays for high load devices.
20,000 cycles
IP66 rated same as original equipment switches.
Standard male Spade terminals to the rear of the switch.
Switch push fits into hole.
This switch require power input for Green Illumination, Power supply for sidelights, power supply for headlights.
The switch can be fitted without a trim panel to most flat surfaces provided the correct hole is cut and the thickness is less than 5mm.
Optional Single or multiple Mounting panels are available
One Wiring guide is included for one or more switches.
There is a rubber gasket to the rear of the switch, this fits against the cut hole or panel cut out.
Switch requires a hole 21.2 mm width, 37.2mm height
Actual switch area required 28mm width, 52mm height
Overall depth 49.61mm, 37.8mm behind switch including terminals
The switch will not fit any existing factory hole on a Land Rover.
Other parts will be required to fit and operate the switch, these include connectors, wire, device to be switched etc
You do not get any connectors,switches in the background or single switch panel just the stated switch at the top of listing!
The extra switches and panels are shown in the picture for customers wishing to purchase more than one switch.
We will combine switches and panels over £30, these will be sent by courier.
Bolt On Bits are please announce the arrival of the RDX K switch, a stylish, affordable, switch solution.
The RDX K switch comes in a variety of functions and switch legends that are screen printed not stickers that could degrade with time.
Please see our other listings for other Functions, Surrounds, Blanks, Panels; we have:
Click on picture to go to the listing
    |
Plain OFF/ON
Spot Lamps OFF/ON
Heated Rear Window OFF/ON
Heated Front Screen OFF/ON
Heated Seat OFF/ON
Heated Mirror OFF/ON
Front Fog lamps OFF/ON
Rear Fog lamps OFF/ON
Hazard OFF/ON will require relays
Fan OFF/ON
Beacon OFF/ON
Work lamp OFF/ON
Map Reading Light OFF/ON
Interior Light OFF/ON
Rear Wiper OFF/ON
Rear Washer OFF/(ON) Momentary
Horn OFF/(ON) Momentary
Compressor OFF/ON
Front Diff Lock OFF/ON
Rear Diff Lock OFF/ON
Sidelight/Headlamps OFF/ON/ON
Winch (ON) / OFF / (ON)
Electric Window (ON) / OFF / (ON)
NEW Winch Symbol (ON) / OFF / (ON)
Optional Trim panels
'Ends'
'Middles'
Single Switch panel
Switch operation OFF/ON/ON
Switch will normally be in the off position, when switch is pressed once sidelights are switched on, a further press of the switch will turn headlights on.
The switch is black plastic, with a white Legend window with Black Screen printed symbol we also have a plain white Legend window with no screen printing.
The white Legend window is illuminated by a green LED.
This can be wired like other dashboard illumination to illuminate the Legend for easier locating in dark situations.
The 'On' operation can be noted by an Orange LED 'Slit'.
This colour scheme is similar to Late Defenders such as Td5 & Tdci models.
Rated as a 12v DC switch
Switching load is 20amp max at 12volts, we recommend the switch is used to 'switch' on relays or low load devices to prolong the life of the switch,it also good practice to use relays for high load devices.
20,000 cycles
IP66 rated same as original equipment switches.
Standard male Spade terminals to the rear of the switch.
Switch push fits into hole.
This switch require power input for Green Illumination, Power supply for sidelights, power supply for headlights.
The switch can be fitted without a trim panel to most flat surfaces provided the correct hole is cut and the thickness is less than 5mm.
Optional Single or multiple Mounting panels are available
One Wiring guide is included for one or more switches.
There is a rubber gasket to the rear of the switch, this fits against the cut hole or panel cut out.
Switch requires a hole 21.2 mm width, 37.2mm height
Actual switch area required 28mm width, 52mm height
Overall depth 49.61mm, 37.8mm behind switch including terminals
The switch will not fit any existing factory hole on a Land Rover.
Other parts will be required to fit and operate the switch, these include connectors, wire, device to be switched etc
You do not get any connectors,switches in the background or single switch panel just the stated switch at the top of listing!
The extra switches and panels are shown in the picture for customers wishing to purchase more than one switch.
We will combine switches and panels over £30, these will be sent by courier.
