AUTOOL CT400 GDI Fuel Injector 6-cylinder Cleaner and Tester is a great upgrade, which adapts the latest GDI design. It not only can be used to clean and test the standard injectors, of note that it can carry out GDI injectors, including compatible for Benz, BMW, AUDI, Porsche. It comes with multi voltages available for GDI injectors, which enables to adapt for different types of injector testing. The machine is the necessary and preferred equipment for the automotive serving and maintenance, research, and teaching training departments.Our product supports 99% of injector cleaning and testing. However, for diesel injectors, it only supports cleaning but not testing. |
![]() | ![]() | ![]() |
For GDI Injector Cleaning&Test AUTOOL CT400 can clean and test not only standard injectors but also GDI injectors, such as for Mercedes-Benz, BMW, Audi, Porsche, Ford, and other direct injection engines. | Multi Voltage Selection AUTOOL CT400 GDI Fuel Injector 6-cylinder Cleaner and Tester designs with various types of voltage output (12V, 70V & 120V) to be selected to adapt for different types of injector testing. | Upgrade Ultrasonic Cleaning Different from other cleaner& tester machines, AUTOO CT400 comes with a cooling fan and thermal protection, and with a power of 60w, its ultrasonic cleaning capacity is significantly enhanced. |
![]() | ![]() | ![]() |
Various Parts equipped&Portable Drawer It is equipped with a variety of injector accessories for different needs. A portable drawer at the bottom is designed to store a variety of parts and for easy access. | 6-Cylinder & 2 Draining Ports Design AUTOOL CT400 can test and clean 6 injectors at the same time for better efficiency; it also has both control valves for cleaning solution draining and test liquid recovery. Very easy and convenient to deal with and no worries about leaving a mess. | Smart Control Panel Adopting high-definition digital control panel display, it makes the operation simple and easy to learn. |
![]() | ||
![]() | ● Power supply: AC220V±10% ● Frequency: 50-60HZ±0.5 ● Relative humidity: <85% ● Ambient temperature: 0℃~+40℃ ● External magnetic field strength: <400A/m ● No open flames are allowed around Technical parameter ● Fuel tank capacity: 1500 ml ● Test tube amount: 140 ml ● RPM range: 0~7500 r/min ● Time range: 0~9900 times | ● PWM pulse width: 0~20.0 ms ● System pressure: 0~0.55Mpa (adjustable) ● Timing: 0~20 minutes adjustable ● Ultrasonic cleaning power: 60W (intermittent work) ● Ultrasonic cleaning frequency: 28 KHZ±0.5 KHZ ● Dimensions: 390mm (length) × 410mm (width) × 430 mm (height) ● Weight: 16.6KG |
![]() | Packing List: 1* AUTOOL CT400 GDI Fuel Injector Cleaner&Tester 6* Taper adapter φ10.5-13.6φ 6* For BMW special adapters 1* Special nozzle pad 5* Plugs for oil rail 1* Ultrasonic bath cover 6* 16mm adapters 6* Nozzle pads 1* Oil rail 6* Adapter cables | 1* Power cable 4* Fixed screws for oil rail 4* Fixed nuts for oil rail 1* Ultrasonic cleaning bracket 1* Filling funnel 1* Outlet valve 6* 11mm adapters 6* 12mm adapters 6* 12.5mm adapters 6* 13mm adapters 6* 14mm adapters 6* 15mm adapters 1* User manual with warranty card |
CT160 Injector Cleaner & Tester It combines ultrasonic cleaning technology and microcomputer oil pressure closed-loop control cleaning and detection technology. This product simulates various engine working conditions and cleans and inspects various automobiles and motorcycle fuel injectors. Its unique design saves weight and volume, while further optimizing the product's functionality. With a larger cleaning tank and cleaning fluid heating effect, which can achieve better cleaning results. |
![]() | ![]() | ![]() |
Ultrasonic Cleaning It can perform ultrasonic cleaning on single or multiple injectors simultaneously,which can eliminate thoroughly blockages on the injector accessories and internal. | Heating the Cleaning Fluid CT160 is able to heat the cleaning fluid in the cleaning tank,which can improve the cleaning effect on injectors | Distinctive Shape Design Compact,Lightweight,Portable,Net only weighs 8kg;large capacity Ultrasonic cleaning tank of 1300ml,all cleaned at once. |
![]() | ![]() | ![]() |
Recovery Cleaning Fluid Used cleaning fluid and testing fluid can be easily recovered. | Wide Range of Applications Supports most of the cars and motorcycles among the market. | Echnical parameters: Tank capacity:2000 ml Range of rotation:0-7500r/min PWM pulse width:0~20.0ms Step 0.1ms Time:0~20min Cleaning frequency:40 kHz Cylinder volume:100 ml Injection times:0~9900 times, step 100ms System pressure:0~0.6Mpa Ultrasonic cleaning power:70W Package dimensions:340*295*360mm |
![]() | ||
![]() | Package includes: 1pc* AUTOOL CT160 Fuel injector diagnostic and cleaning Cleaner Machine main unit 1pc*Refilling funnel 1pc* Ultrasonic leaning stand 1pc*Testing pad 2pc* Oil drain valve 1pc* Lock pole 1pc*Lock nut 4pc* Extended plug | 4pc* Motorcycle top oil inlet connectorⅠφ10mm 4pc* Motorcycle top oil inlet connectorⅡφ11mm 4pc* Motorcycle top oil inlet connectorⅢφ10.6mm 4pc* Car top oil inlet connectorⅢφ10.6mm&13.4mm 3pc* Plug 1pc* Signal wire 4pc* Adapter cable 1pc* Oil rail 1pc* User manual |
AUTOOL CT150 Fuel Injector Tester & Cleaner is a professional 4-cylinder car injector test cleaning machine. CT150 Fuel Injector Cleaner Tester helps us clean and test the fuel injectors of most gasoline cars and motorcycles. Its working voltage range is 110-230V. |
Function menu: 1. ultrasonic cleaning 2. ldling test (0-20ms) 3. medium speed test (0-7.5ms) 4. high speed test (O-4ms) 5. acceleration test 6. switching speed test 7. tightness test 8. ldling Spray Value Test 9. medium speed spray value test 10. high speed spray value test 11. reverse flushing 12. cleaning without disassembly |
![]() | ![]() | ![]() |
Injector Test Injector test is to test the condition of atomization, drop, block, spray angle, and uniformity of the injector. Including Idle Speed Test, Medium Speed Test, High Speed Test, Accelerating Test, Shifting Speed Test, Leakage Test, Idling Spray Value Test, Medium Speed Spray Value Test, High Speed Spray Value Test. | Reverse Cleaning & On-Vehicle Cleaning Reverse Flushing - The flush fluid go into the injector through its outlet and go out through its inlet, so that it can clean the filth inside, which can not be cleaned by normal way. Non-dismantle Cleaning(optional function) To clean the whole fuel system of the engine, including fuel supply system, burning room and the injector. | Application: Applicable voltage support 110V power input. Fit for most petrol cars and motorcycles injectors, support for Audi, for Australia Ford, for Benz, for BMW, for Brilliance, for Chevrolet, for Chevy, for Chrysler and so on. |
![]() | ![]() | |
13 Main Functions: ldling Test (0-20ms); Medium Speed Test (0-7.5ms); High Speed Test (O-4ms); Accelerating Test; Shifting Speed Test; Leak Checking Test; ldling Spray Value Test; Medium Speed Spray Value Test; High Speed Spray Value Test; Reverse Flushing; No-disassembly Cleaning; Unit Info | Specifications: Fuel Tank Capacity: 2000 ml Capacity of Measuring Cylinder: 125 ml Speed Range: 0~7500 rpm Injecting Times: 0~9900 Step: 100ms PWM Pulse: 0~20.0 ms Step: 0.1 ms System Pressure: 0~0.6Mpa (adjustable) Time: 0~20 minute (adjustable) Power of Ultrasonic Cleaning: 70W Frequency of Ultrasonic Cleaning: 28 KHZ±0.5 KHZ | Packing List: 1 x CT150 Unit 1 x Refilling Funnel 2 x Lock Pole & Nut 1 x Testing Pad 3 x Plug 2 x Extended Plug 1 x Oil Rail 1 x Oil Drain Valve 4 x Adapter for Fixing Injector on Machine 4 x Linkage 1 x connection line |
AUTOOL CT200 injector cleaning and testing machine is designed with wide voltage technology and suitable for 220V voltage. It is combined with ultrasonic cleaning technology and microprocessor controlled cleaning detection technology. Fuel pump oil supply simulates low, medium and high engine conditions, and cleans and tests automotive fuel injectors; ultrasonic cleaning can clean multiple injectors at the same time, effectively and completely removing carbon deposits for automotive injectors. |
![]() Multi-ProgressAutool CT-200 fuel injector cleaner and tester is 6-cylinders fuel injector cleaning machine (with 6 tubes), | ![]() Reverse Flush Cleaning & On-vehicle CleaningOn-vehicle cleaning: The unit is equipped with various adapters and couplers that facilitate cleaning on the injectors on vehicle. | Widely UsageAutool CT200 fuel injector cleaning and testing machine can clean and test both petrol car and motorcycle injector. You can even clean fuel system. It is good at removing carbon from your fuel system, testing leaking, Uniformity, inbreathe about injectors. Note: Cleaning Support All Vehicles, Testing support Petrol Vehicles only. |
![]() | ![]() | |
Specifications Product Name: Autool CT200 Automotive Injector Cleaner & Tester Main unit power supply: AC110V±10%, 50/60Hz. Main unit power: 280W (CT-200) Ultrasonic cleaner power: 70W; Fuel Tank Capacity: 2000 ml Capacity of Measuring Cylinder: 125 ml Speed Range: 0~7500 rpm | Power Supply:110/220V Main unit dimensions:405*380*430MM Package weight:17.89KG Package dimensions:485*465*490MM Power of Ultrasonic Cleaning:70W Frequency of Ultrasonic Cleaning:28KHZ±0.5KHZ | Packing List 1pcs X Petrol Car Injector Tester Main Unit 2pcs X Valve (for discharging fluid from machine tank) 6pcs X Cleaning connector,Sealing ring,Washer fittings,Plugs 1pcs X Ultrasonic cleaning bracket,Ultrasonic cleaning cover,Power cable,Funnel,Oil separator 6pcs X Pulse signal cable 2pcsX Fixing bolt 1pcs x Manual(English) |