The product adopts 5.0 Bluetooth DC3.7V-5V power supply, the maximum power can be configured to reach 10W (5W*2), and the external power amplifier can be modified, please connect it from the 3P socket OUT audio output;
PCB size 40MM*34MM*9MM (including nest);
Micro wave power switch control;
Bluetooth 5.0 device product ID: YMX-868BT
Power supply: DC voltage (3.7-5V), current should be 1.5A-2A or above; USB is the charging input (when the lithium battery is plugged into the red power socket, it can be charged from here; the red light is on when charging, the red light is not lit )
Please choose the original authentic charger, the poor quality of the power supply can not keep up with the constant current instability, easy to damage the battery and board.
Power requirements:
Voltage DC voltage 3.7V-5V, voltage can not be higher than 5V; current 1.5A-2A; (note: if using 3.7V lithium battery, please ensure that lithium battery and discharge can reach 1.5A, some lithium battery has voltage but current is not Please use with caution if it is stable or does not meet the requirements; otherwise it will always restart or the sound quality is not good or bad.
Speaker requirements:
(Satellite) left and right channel sub-box speaker: select 4 ohm (Ω) / 5W * 2 full-range speaker (note: if using 3.7V lithium battery, please ensure that lithium battery discharge can reach 1.5A, some lithium battery has voltage but current is unstable Please do not use if you can't meet the requirements; please choose 4 ohms (Ω) / 3W * 2 for the speakers.
Bluetooth connection:
The mobile phone starts Bluetooth detection from the setup menu, so that the mobile phone is detected by the device, and then goes to the Bluetooth menu - search for the device or the paired device. After searching (YMX-868BT) "Touch Pairing", it also hears "Connected successfully or prompts" to complete the pairing;
Note: not a smartphone (Android) to enter the password -0000; product Bluetooth device name YMX-868BT
Note:
1) Red 2P seat BAT is connected to the power supply positive DC3.7V to 5V+, GND is connected to the negative pole; white 2P seat from bottom to top L-O-/L-O+ is connected to the speaker 1, white 2P seat R-O-/R-O+ is connected to the speaker 2
2) Working voltage lithium battery 3.7V, or regulated power supply DC DC 4.5-5V, current (600-700MA when connected to a speaker; 1.5-2A for two speakers). Lithium-powered speaker with 4 ohms 3W+3W, voltage regulator Power 5V speaker with 4 ohms 5W+5W. If the current is not enough, there will be a jump or Bluetooth instability, the motherboard will always restart or the sound quality is not good / broken / distortion and other bad phenomena (if you have this problem, please check your power); The voltage cannot be higher than 5V, otherwise the main chip and the power amplifier IC and related components will be damaged.
3) Audio output: 3P block OUT audio output can be modified for external power amplifier, the middle is audio ground, left and right are L and R respectively
4) If you will connect or use lithium battery (3.7-4V power supply), do not add this component (IN4007), so the voltage will be reduced by about 0.7V, read U disk and SD card will not read, you can Directly cut off the IN4007
Package included:
1Pcs+ 4*Cables
1. We only accept payment via PayPal, other payment is not acceptable.
2. If you don’t have PayPal account, please register through https://www.paypal.com before you bid our items. 3.Please
make sure your shipping address is the same of your eBay address before
you pay. We will not be responsible for such a case if you change you
shipping address as we have shipped your items out.
1. We only ship to confirmed eBay address, your eBay address must match your Shipping address.
2.All
items are available for shipping within 1-3 business days after
receiving the payment. Please be aware that weekends are not business
days. 3. Any
non-received items caused by invalid address registered on PayPal are
not in our full refund or replacement policy. Shipping fee has including
the local handing and packaging fee.
4. We
are unable to take any responsibility for any custom delay or tax,
Reason is because transit time is highly depended and provided by postal
Service( Except weekends and holidays.)
1. If
you are not satisfied with the item, please return it
within 7 days for a replacement or money back. Please contact me before
you return it.
We are 100% Satisfaction Guarantee to our customers.
2. All
returned items MUST BE in the original packaging with all components
and accessories included, And you MUST provide us the return shipping
information The shipment or the tracking number）. 3. Returned shipping fee is to be paid by the buyers. We will not
responsible for any custom duty or import tax. Thank you for your
understanding.
Our working time: Beijing time : Monday to Saturday 8:30 am to 5:30 pm. If you send email to us,In our working hours will be resumed within 24 hours. If you we are not satisfied with the product or service ,please contact
me and don't give us negative or natural feedback,We must give you a
satisfactory solution. I hope all of us try together to create a better environment for ebay shopping !!
On 7-Dec-2022 at 02:47:01 EST, seller added the following information:
