Description
1-1/2" Stainless Steel 304 Tri Clamp Motorized Electric Actuated Ball Valve AC220V
1-1/2" Stainless Steel 304 Tri Clamp Motorized Electric Actuated Ball Valve AC220V
Sterilization temperature reached 150℃
Valve material:SUS 304 Stainless Steel
Port thread size: 1-1/2"(Φ38)
Connection: Clamp
Voltage:AC220V
Motor Power:10W
Rated Current:0.15A
Output Torque:50N.M
Actuation Time:20S
Rotation Angle:0°-90°±5°
Control Circuit:Dry Contact
Insulation Resistance:100MΩ/500V DC
Pressure Rating:1500V AC/1min
Protection Level:IP67
Electrical Interface:PG13.5 Metal Waterproof Cable Connector
Environment Temperature:-30℃~+60℃
Special Warning:1. Can not be two or more electric actuator power line in parallel, in other words, can not use the same contact to control more than one electric actuator, otherwise it will cause loss of control and motor overheating!
2. It is recommended to use Φ6-Φ11 cable to ensure the connection cable is safe and reliable. Thread the cable through the lock cover and the wire lock, fasten the wire to the wire terminal according to the wiring diagram, and then lock the wire lock cover to secure the cable. If you use cables that are not compatible with the cable gland, water may damage all internal parts from the waterproof cable connector into the actuator.
3. When using the cable tube, take waterproof measures. The position of the valve actuator should be higher than the position of the cable tube, ensuring that the water drops do not flow along the cable into the actuator.
4. In principle, the use of shielded cable signal lines should be separated from the power line wiring.
