USB 3.0 to SATA Dual-Bay External Hard Drive Docking Station 2.5/3.5" SSD HDD

Wavlink Dual Bay Hard Drive Docking Station, USB 3.0 to SATA I/II/III 

SATA Drives Only:  This docking station do not compatible with IDE drives. It is compatible with
all 2.5 inch and 3.5 inch SATA HDD and SSD,
Equipped Type-C Port: The type-c converter is compatible with your USB C devices, like thunderbolt 3 laptop,
computer with USB-C port & USB C Android phone.
Considerate Deisgn: Four anti-skid footpads on the bottom of the product provide maximum protection for your device
from sudden sliding off and insure the stability.
Smart Auto-sleep Mode: The auto sleep mode greatly reduces the invalid energy consumption,
prolongs the service life of the hard disk and protects
the hard drive data for you. Stable Power Supply: Equipped with 12V/3A power adapter to meet the power
consumption requirements of large-capacity hard drives.
Please connect the power adapter when using.

Features:
1. Support maximun capacity up to 2x16TB.
2. Support UASP accelerated transfer protocol.
3. Automatic replication of HDD or SSD (clones from Source Disk A to Target Disk B) at a click of the button.
4. Use the dedicated DC power adapter certified by PSE.
5. Plug and play. No software, drivers or complicated installation required.

Specification:
1. Voltage: 100~240V
2. Operating Temperature: 0°C~40°C
3. Storage Temperature: -10~70°C
4. Power Plug: US
5. Power Supply: 12V/3A
6. Port: USB 3.0 SATA DC
7. Processor: 2.0Ghz core2
(HDD/SSD in the decription is only to present the enclosure and will not attached in the package)

Instructions on How to Connect the Dock to the Computer:
1). Please unplug the DC power adapter to make sure that the power is off before starting.
2). Insert HDDs/SSDs into the slots vertically and slowly until them stick.(One HDD/SSD is also supported)
3). Connect the power adapter and turn the  "ON-OFF" switch on.
4). Connect the USB cable to the computer then you can use it as your computer's external hard drive.

How to Operate Offline Clone Function:
Please unplug the DC power adapter to make sure that the power is off before starting.
Insert Source Disk into hard drive bay A, then insert Target Disk into hard drive bay B.
Make sure the USB cable is disconnected from computer.
Connect the power adapter and turn the"ON-OFF" switch on.
Hold the CLONE button for about 3 seconds, when all leds turn on, the clone progress will start.
Four lights (25%, 50%, 75%, 100% ) will turn solid blue when the cloning process is completed.
Finally turn the "ON-OFF" switch off, disconnect the power adapter and eject your drives.

Tips for Offline Clone:
- The capacity of target disk must be larger than the source disk.
- Please confirm that your source drive and target drive can both work properly.
- Please connect the 12V power adapter to ensure a stable power supply for transmission.
- To avoid data transfer errors, overheating and damage to the device, please make sure
  that there are no faulty driver cells.
- To avoid data loss, do not remove or insert drives when one drive is working in the docking station.
  Please power off the dock before removing.
- Please confirm the target drive have no data. If you have existing data on the target drive,
  the cloning process will eliminate your target drive's data.
  Because the target drive will be cloned to be the same as the source drive,
  partition, format and data are the same too.  

Package Included
1 x Dual Bay SATA HDD Docking Station
1 x 12V 3A Power Adapter
1 x USB3.0 Cable
1 x User's Manual

1. We accept payment by PayPal, Apple Pay ,Google Pay, and  Credits .
2. Please make a payment within 4 days, eBay will automatically end it in fifth day, and will have an effect with your account. 
3. For order cancellation, please inform us within 24 Hours. 
1. US warehouse available, Local fast shipping, and no custom tax is needed.
2. All products will be checked carefully and packed in good condition before shipping. 
3. Tracking number will be upload on ebay within 24 hours after shipment.
4. We ship according to the address you placed your order, if the address is wrong, please contact us to modify before shipping.

1. If you are not satisfied when you receive your item, please return it within 30 days for a replacement or money back.
    Please contact me before you return it.

2. For all return products customers MUST contact us for the returning address.

3. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number,
    specific reason for the return, and your eBay ID.

4. If you need return, please check twice to confirm the item not work and contact our customer service representative,
    let us know the detailed problem and send us some pictures for confirmation. Then get a unique address for return.

 

1.Welcome to Wavlink, we are the leading Design product manufacturer that provides Display solutions,
   TV and capture solutions, Wireless and networking solutions, High end PC accessories products.

2.We always pride ourselves on providing the outstanding service and high quality products, make our customer feel confident buying online.

3.By shopping with us, you can get the latest technology for the best price.

1.Please contact us via ebay message if you have any problem.

2.ALL replies will be sent to your email , if you don't get response within 1 business days,
   please check your spam box or E-mail us again to avoid any delay!