The HighPower Wi-Fi AP/Repeater is ideal for long distance point-to-point/multi-point wireless data transmission,
providing a free Wi-Fi service in remote such as factory, community, street or etc. The AP/Repeater can take
an existing 2.4GHz wireless signal, repeat and extend it to a longer range where it is far away for the router or
access point to reach, and it supports 2.4G transmission speeds of up to 300Mbps. It has one directional flat antenna
(2 x built-in 11dBi high gain antennas) providing even better wireless performance, transmission rates,
stability technology automatically avoids channel conflicts using its channel selection feature.
Wish you'd have an enjoyable use experience with our product!
Features for N300 Outdoor WiFi Range Extender
Excellent Outdoor WiFi Option: It supports up to 64 devices and provides 2.4GHz 300Mbps high speed
with 100M Ethernet port. Point to Point/Multi-Point connection (1-4) can be used for elevator monitor/surveillance
networks. Simple settings can achieve wireless optimization, and improve the quality and effectiveness of link transmission.
11dBi Directional Antenna: High gain antenna panel with 2 built-in 11dBi directional MIMO antennas,
is designed to directionally strengthen the WiFi signal and make it more focused. Also the WiFi coverage in
a specific direction is farther than omnidirectional antennas. It will make full use of your existing network!
1.5km Wireless Data Transmission: Maximum 1.5km long range wireless data transmission
(tested in paired PtP or PtMP transmission, barrier-free environment). Specially designed for outdoor use,
ideal for extend WiFi network video surveillance range for barn, shop, garage, warehouse, factory, community, street .
Flexible PoE Deployment: Support 24V PoE power supply, easy | Up to 64 Devices: Share WiFi network with up to 64 devices | Wide Range Transmission: 1.5km wireless data transmission range for point to |
Installation Height: Keep the height of the flat antenna 2-3 meters above the ground without obstruction,
and 1-2 meters horizontal drop from the network terminal.
Installation Direction: The signal facing the front of the panel antenna is much stronger, please pay attention to
whether the front and back of the antenna panel are facing correctly when installing.
Installation Steps: Support flexible deployment on the wall or on the round pole. For detailed steps,
please refer to our step-by-step diagrams in this page or installation instructions in the package.
Panel (L * W * T): length 19.5cm/7.68in, width 12cm/4.72in, thickness 3cm/1.18in;
Router: diameter 4.5cm/1.77in, height 17cm/6.69in. Note: Data by manual measurement for reference ONLY.
6 status LED indicators help you see the power/ internet status of device. Since the green lights might be
not so obvious in the open air, you can try to cover the device with your hand to check.
* The real performance of the product may vary in accordance with different environmental conditions.
* If your device is damaged or defective, please tell us for more details.
* All pictures shown on the package are for illustration purpose only.
FAQ
Q1. Why doesn't the login page appear after entering wifi.wavlink.com?
-If your computer is wirelessly connected, please verify that you have connected to the device's SSID.
If your computer is connected via an Ethernet cable, please verify that the connection is stable.
-Make sure your computer is set to obtain an IP address automatically.
-Use the IP address to log in to the page. The default IP is 192.168.10.1. If the device is connected to
the host Wi-Fi, please go to the router 's DHCP client list to obtain the device' s current IP address.
-Please reset the device and try again. If the problem still exists, please feel free to let us know.
Q2. How do I restore the device to its factory default settings?
-While the device is powered on, press and hold the Reset button until all the LEDs turn on momentarily.
Q3. What should I do if the LED does not change to solid after completing ?
-You may have entered the incorrect Wi-Fi password of your host Wi-Fi during the configuration.
Please log into the device' s web-based interface to check the password and try again.
-Reset the device and go through the configuration again.
Q4. I have enabled a wireless MAC filter, wireless access control, or access control list (ACL) on my router.
What should I do before configuring and using the device ?
-If you have enabled those functions of your router, you may need to disable them first.
And then follow OPTION ONE or OPTION TWO to complete the configuration. .
1. If you are not satisfied when you receive your item, please return it within 30 days for a replacement or money back.
Please contact me before you return it.
2. For all return products customers MUST contact us for the returning address.
3. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number,
specific reason for the return, and your eBay ID.
4. If you need return, please check twice to confirm the item not work and contact our customer service representative,
let us know the detailed problem and send us some pictures for confirmation. Then get a unique address for return.
1.Welcome to Wavlink, we are the leading Design product manufacturer that provides Display solutions,
TV and capture solutions, Wireless and networking solutions, High end PC accessories products.
2.We always pride ourselves on providing the outstanding service and high quality products, make our customer feel confident buying online.
3.By shopping with us, you can get the latest technology for the best price.
1.Please contact us via ebay message if you have any problem.
2.ALL replies will be sent to your email , if you don't get response within 1 business days,
please check your spam box or E-mail us again to avoid any delay!