Nice and secure - won't pop back out

Due to the unique patent-pending design and Anchoright Chain Markers will not pop out from between the links once they have been put in place. This is to extend the life of the markers and reduce pollution in the sea from plastic cable ties and pop-in markers or paint wearing off. 

The 8mm and 10mm, 3/8" markers are held together with a marine screw whilst the 12mm and 14mm markers have a moulded-in brass insert and a brass bolt.

So whether passing through a windlass, dragging on the seabed floor or piling up in the anchor locker, the Anchoright Chain Markers stay put for seasons. Application is really simple too by firmly pressing the two halves together and then securing them with the marine-steel screw provided

Wide range of coloured chain markers

Available in 15 different colours, almost all chain lengths can be marked with a unique colour at every position. This means you wont have to remember complex sequences and combined with our customisable guide plate this simple yet effective chain marking solution makes anchoring much easier and safer.

Easy application

Fitting the chain markers is extremely simple, all you need is a screw driver.

Snap the two halves of the chain marker off the rack, place one on each side of the chain link and then apply the screw. If you struggle, you should sit down and have a good think about whether you should be in charge of a boat!