OCTO ENTTEC
8 Universe eDMX to Pixel Converter
Click To View Video
ENTTEC’s OCTO is a robust and reliable installation grade LED controller engineered to take any architectural, commercial or entertainment project to the next level.
With 8 universes of eDMX to pixel protocol conversion and network chaining between devices, the OCTO allows for fast deployment of LED strips and pixel dot systems compatible with a wide range of devices.
The OCTO is packed with installer-friendly features such as an identify button to check correct wiring, temperature monitoring, a wide input voltage range and intuitive configuration and management through its localhost web interface. All contained within a 4 DIN unit form factor.
The inbuilt FX engine allows users to edit and create presets, using the OCTO’s web interface that can be configured to run standalone at power up.
Includes:
OCTO
TS35 DIN Clip
2 Torque T10 self-tapping screw
‘Read Me’ card
Please note: the OCTO is NOT provided with a power supply
Features:
Two * 4-universe pixel outputs with Data and Clock support.
Support for up to 8 universes of Art-Net, sACN, KiNet and ESP
DIN Rail mount (attached)
2-pin Terminal connector for power input
Each Plink output can be mapped to 2 Ethernet Universes
16 Universe Ethernet to Plink
Control a maximum of 2,720 RGB pixels
Easy to configure through any web browser
DHCP or Static IP address support
Multiple pixel protocols support: Art-Net 1/2/3, Streaming ACN (sACN), Kling-net, ESP
Surface or TS35 DIN rail mounting option
Intuitive device configuration and updates through the inbuilt web interface.
Test/Reset button allows installers to quickly check wiring is correct without requiring a network connection.
Simple FX generator mode to create and execute preset effects on the fly, configurable to play from power up.
Grouping functionality to reduce input channel count
Specifications:
8 universe eDMX to LED pixel controller with network chaining in a compact 4-module DIN-rail form factor
2* Network (RJ45)
2* SPI Output (4-Pin phoenix) connector
1* Power (2-Pin phoenix) connector
LED indicators: Forward facing LED indicator, Network link / activity (integrated into RJ45 ports)
eDMX Input Protocol: Art-Net, sACN, Kling-net, ESP
Data output type: SPI (NZR) See website for all supported protocols
Max. eDMX -> pixel conversion per device: 2048 channels
Max. pixels controllable per device: RGB 1360 (680 per port), RGBW 1024 (512 per port)
Max. Refresh Rate 46 frames per second (fps)
Network Speed: 10/100Base-T
Network Discovery: ENTTEC’s NMU software
Network configuration: Static (Default 192.168.0.10) / DHCP
Integrated network switch
Recommended network device quantity per chain: Chains of up to 8 devices give optimum synchronization between outputs
Max. network device quantity per chain: 50
Identify/Reset button
Configurable pixel color ordering
Creation of effects and presets on the device
Play preset upon startup
Firmware Updates: Upgradable via web interface
Insulation Rating: IP20
Environmental Operating Temperature: -4°F to 122°F (-20°C to 50°C)
Environmental Operating Humidity: 5 to 95% (non-condensing)
Cooling Method: Convection
Current Draw: 9vDC 400 mA, 48vDC 75 mA
Power Consumption: 5 W (Max.)
Max. heat dissipation 4.5
Power Input: 4-60vDC
Size: 3.96" L x 3.07" W x 1.46" H (100.5 x 77.9 x 37.1 mm)
Weight: 0.11 kgs/0.24 lbs
Material: ABS plastic
SALE: $329.99
FREE S&H in continental US (e-mail for international / offshore USA rates)