|
|
BREAK BEAM DRIVEWAY ALARM ALERT SYSTEM
INCLUDES:
(1) DAKOTA ALERT RE-4K PLUS / RE-4000 PLUS
WIRELESS RECEIVER
WITH 2 NO/NC RELAYS + 12VDC TERMINAL
+
(1) PAIR OF DAKOTA ALERT SBB-4000
BREAK BEAM TRANSMITTERS
|
BREAK BEAM DRIVEWAY ALARM ALERT SYSTEM
STATE-OF-THE-ART
DRIVEWAY ALARM
WEATHERPROOF DETECTORS / SENSORS
MONITOR UP TO 16 ZONES
(WITH ADDITIONAL TRANSMITTERS)
(SOLD SEPARATELY)
FACTORY WARRANTY
(CLICK HERE OR ON THE MAILBOX)
Super Dependable Break Beam Security
The break beam sensors can be spaced up to 300 feet apart. It will detect people or vehicles that pass in between them and then it will send a signal to the receiver up to 1 mile away. Can be used to monitor driveways, back yards, tool sheds, etc.
Easy Installation
Includes mounts for both a flat surface and a pipe mount. Up to 16 sensors can be paired with one receiver or an unlimited number of receivers can be paired to one sensor. Simple code-learning technology means you can have this set up in minutes. The receiver will play one of 16 tunes whenever a signal is received, and it will also give a relay output and 12 VDC output.
Dual Solar Panels
Each beam unit has two solar panels to help ensure proper charging throughout the day.
Longest wireless range in its class– One Mile wireless range is much greater than other products that claim ¼ mile or ½ mile. The long range means the radio signal is more likely to get through to the receiver.
Operating Range: -30°F to 120°F *Actual range will vary depending on the environment. Note: this transmitter is only compatible with the 4000 series receivers.
DAKOTA ALERT RE-4K PLUS RECEIVER DESCRIPTION:
The Dakota Alert RE-4K PLUS Receiver with Chime and Relay is capable of receiving a wireless signal from any of the Dakota Alert 4000 series wireless driveway alarm systems or sensors. It can accept up to 16 wireless 4000 series transmitters and offers a selection of 16 different tunes allowing the user to know which sensor has been triggered. The RE-4K PLUS has a wireless range of up to 1 Mile, meaning you can reach virtually any part of your property without the need for signal repeaters. Add an extra receiver(s) to your Dakota Alert 4000 series to enable notifications in different rooms, offices, the garage, shed or barn.
The Dakota Alert RE-4K PLUS receiver plugs into a standard wall outlet and can be placed on a table or mounted on the wall. When the receiver gets a signal from the transmitter, one of 16 different tones will sound for a few seconds. There is also a volume control, allowing you to set the sound to the desired level.
*Wireless range is maximum, line of sight, without interference. Obstructions, hilly terrain and interference will reduce range. Actual wireless range will vary depending on the environment. Note: This transmitter is only compatible with the Dakota Alert 4000 series receivers. Note: The Dakota Alert RE-4K PLUS Receiver replaces, but is not compatible with, the DCMA-2500 with up to double the wireless range and has 2 NO/NC RELAYS AND A 12VDC TERMINAL!!!
DAKOTA ALERT SBB-4000 BREAK BEAM TRANSMITTER DESCRIPTION:
Super Dependable
The break beam sensors can be spaced up to 300 feet apart. It will detect people or vehicles that pass in between them and then it will send a signal to the receiver up to 1 Mile away. Can be used to monitor driveways, back yards, tool sheds, etc.
Easy Installation
Includes mounts for both a flat surface and a pipe mount. Up to 16 sensors can be paired with one receiver or an unlimited number of receivers can be paired to one sensor. Simple code-learning technology means you can have this set up in minutes.
Dual solar panels– Each beam unit has two solar panels to help ensure proper charging throughout the day. Longest wireless range in its class– One Mile wireless range is much greater than other products that claim ¼ mile or ½ mile. The long range means the radio signal is more likely to get through to the receiver.
Operating Range: -30°F to 120°F *Actual range will vary depending on the environment. Note: this transmitter is only compatible with the 4000 series receivers.
FEATURES:
-
DAKOTA ALERT RE-4000 PLUS / RE-4K PLUS RECEIVER FEATURES:
(2) Form C (Normally Open and Normally Closed) Relays, Rated 3A
(1) 12VDC Output Terminal - Max 400mA
Volume Control
LED Indicator Lights
Sixteen Different Chimes Tones - Ding Dong (high), Ding Dong (low), Westminster, Fur Elise, Alarm/Siren, Coo Coo Clock, Bird Chirping, Twinkle Twinkle, William Tell, Canon in D, Morning, Toreador March, Beep (high), Beep (low), Beep Beep, and Beep Beep Beep Beep.
Operating Voltage - 12VDC - Power Supply Included - 110v / 120v
Frequency - 433.92 MHz
Wireless Range - up to 1 Mile*
-
DAKOTA ALERT SBB-4000 BREAK BEAM TRANSMITTER FEATURES:
Solar powered wireless infrared break beam system that is simple to install and requires no wiring
Break beam sensors are powered by lithium batteries that are recharged through the solar panels during the day
Infrared sensing terminals can be mounted up to 300 feet apart and will send a signal back to the RE-4K PLUS receiver up to 1 Mile away anytime someone passes between the sensors
Will not be activated by any motion outside of the monitored beam
Sensors are not affected by small objects such as falling leaves or birds
Ideal for outdoor applications such as storage lots lumber yards car dealerships etc.
Multiple sensor pairs can be used to send a signal to one receiver if you wish to set up a perimeter
*Wireless range is maximum, line of sight, without interference. Obstructions, hilly terrain and interference will reduce range. Actual wireless range will vary depending on the environment.
(CLICK HERE)
|
|
CONTENTS:
-
EACH DAKOTA ALERT RE-4K PLUS / RE-4000 PLUS RECEIVER INCLUDES:
Power Supply - 110v/120v
User Guide
-
EACH DAKOTA ALERT SBA-4000 BREAK BEAM TRANSMITTER BUNDLE INCLUDES:
Break Beam Pair “A” and “B” (2 sensors)
(8) M4x10 Pan Head Screws with Flat Washers and Lock Washer
(8) M4x40 Pan Head Screws
(8) M4 Nut
(4) Metal Pipe Mounts
(4) Pipe Mount Rubber Adapters
(2) “C” Mounting Brackets
User Guide
NOTE: It is recommended to charge BOTH the “A” and “B” Break Beam Transmittters via a USB Micro Charger (not included) for about 4-6 hours before starting the initial set-up.
CONDITION:
BRAND NEW
Factory Sealed Boxes
U.S. WARRANTY:
1 YEAR PARTS AND LABOR (U.S. Warranty) FROM MANUFACTURER
U.S. WARRANTY COVERAGE:
MANUFACTURER'S Warranty covers Repair or Replacement of defective product.
MANUFACTURER'S Warranty does not cover damage resulting from accident, abuse, acts of God or improper operation.
PAYMENT INFORMATION:
PLEASE CONTACT US BY EMAIL (CLICK HERE)
or Call us at
.
SHIPPING INFORMATION:
PHONES (HOME, BUSINESS, SINGLE LINE, MULTI-LINE, CORDED AND CORDLESS),
INTERNET PHONES, RETRO AUDIO, WEATHER STATIONS,
AND OTHER FUN ELECTRONIC ITEMS:
