Description:
Product Model: PZEM-009
Measurement range: DC8-100V
Optional color: green / orange / blue
Screen: LCD
Measurement accuracy: 1% (±1 word)
This product is only applicable to the measurement of 12V, 24V, 36V, 48V, 60V, 72V iron phosphate carp batteries or ternary polymer carp batteries.
Product Function.
Measure the battery voltage remaining power and display through the LCD LCD screen
1. Turn on/off display
The LCD display can be turned on or off with a short press of a button
2. Battery specification selection
If you want to change the battery specification during use, you can set it by yourself as follows:
Step 1: Press and hold the button for 1 second until the word [60VL] appears on the screen (the specific display varies according to the battery specification, see Table 1), then release the button;
Step 2: Press the button briefly to select the battery specification, please refer to Schedule 1 for details:
Step 3: Press and hold the button for 1 second or stop the button action for 2 seconds to save the data and return to the normal display surface.
3. Voltage calibration
The product has been fully calibrated before leaving the factory, if you think there are deviations, you can also calibrate it by yourself as follows:
Step 1: Press and hold the button in the case of power failure
Step 2: Input the standard DC20V voltage
Step 3: The LCD will display CAL-PASS and return to the normal display interface to indicate successful calibration, then release the button.
4. Waterproof function
The product panel is embedded with a seal, after installation, the panel part has anti-life splash function.
Product display.
Color printing LCD screen: voltage + percentage + battery symbol combination display
Package Include:
Power tester * 1
manual * 1