TECHNICAL DATA SHEET
DEFINITION
Sealant-forming together based silicone elastomer neutral, low odor, crosslinking temperature.
PROPERTIES
One component, does not lack premix.
Excellence adhesion.
Cures at room temperature.
Excellent temperature resistance.
Good resistance to weathering. No endurance nor cracks.
Excellent resistance oils in the sealed rigid joints.
INDICATIONS
Surfaces must be clean and dry. If necessary and a mechanical treatment should perform cleaning with an oil-solvent such
as acetone. For joints that must be highly stressed, or with low adhesion to the substrate.
APPLICATIONS
Union and replaced seals of cork, cardboard, fiber, etc.
Sealing joints in high temperature conditions.
Bonding and sealing of panels, oven doors, flues,etc.
Sealing of oil pans and water pumps.
Excellent resistance to oils in sealing rigid joints.
CHEMICAL RESISTANCE
Good water, antifreeze, diluted inorganic alkalis,oils and diesel and other hydrocarbons.
CLEANING
The product with an organic solvent. Once cured only mechanically removed.
STORAGE
Store in a cool, dry place.
Duration: At least 2 years.
2
ajusa.es | EN (English)
TECHNICAL DATA SHEET
TECHNICAL CHARACTERISTICS
Appearance Homogeneous creamy
Lift (ISO 7390) < 5 mm
Training skin at 230/50% RH (ASTM C-679-71) 25-35 minutes
Curing speed at 23ºC y 55% H.R 3mm / 24 hours
Application temperature +5 a +50 ºC
Appearance Similar to rubber
Shore A hardness (ISO 868) Approx. 60
Elastic Modulus 100% (ISO 37) Approx. 1.8 MPa
Tensile strength (ISO 37) Approx. 2.5 MPa
Elongation at break (ISO 37) Approx. 260%
Resistance temperature operating -50 to +270 ºC
Occasional temperature resistance +300 ºC
International Buyers (outside United Kingdom)