The LED module is designed to backlight the output power level meters in the following Technics amplifiers:
  • SE-A900S, 
  • SE-A900SM2, 
  • SE-A909S, 
  • SE-A1000, 
  • SE-A1000M2,
  • SE-A1010. 
It replaces the original module which has axial light bulbs (XAMR131). Compared to the original module, LED module has lower power consumption, lower operating temperature and many times longer life, reaching tens of thousands of hours.

The LED module does not require any modifications in the design of the amplifier. Assembly method is the same like for the original module. The module also has no effect on the quality of the sound. The module's power supply is based on a classic power supply without inductive components that could affect the operation of audio circuits.

The module allows you to set the brightness of the lighting and adjust it to your liking.


Specification:
  • Power consumption (default brightness): 1.2 W 
  • Power consumption (minimum brightness): 0.4 W 
  • Power consumption (maximum brightness): 8.5 W 
  • LED correlated colour temperature (CCT): 3000 K (warm white) 
  • Number of LEDs: 2x13 
  • Dimensions: 176x45 mm (left PCB), 176x30 mm (right PCB)
  • Weight: 55 g
Remarks
  • The LED module may be slightly different from the one shown on the images. Differences may apply to the position of some components and/or labels. However, the assembly method and marking of the elements are the same. Parameters and operation also are the same.

  • Although the backlight module contains warm white LEDs, the light emited by LEDs is cooler than the light emited by original axial light bulbs. Look at the pictures.

  • The backlight is compatible with both SE-A900/A1000 and SE-A909/A1010 amplifiers. All you have to do is open or close one jumper. If you let me know which model of the amplifier you have, I will do it for you.

  • The amplifier visible on the photos is not part of the offered item.