The smoke EVAP leak detector support air intake system test, exhaust system test, crankcase system test, automobile seal test, fuel tank system test, turbine system test, and various pipe fitting tests. The working principle is the case that the device will heat the test oil (baby oil) into smoke, and then blow the smoke into the sealed pipe system, and find leaks in the pipe through the smoke. (Note: Does not include oil)
|
With dual-mode design, EVAP smoke machine has two independent control modes: air mode and smoke mode. Both adopt smoke generator technology to produce stable and large amount of smoke within 10 seconds. After upgrading, the smoke leak tester equipped with an oil level meter to observe the current test oil volume. And equipped with airflow meter to observe the current airflow volume. The oil drain is convenient for recycling the remaining baby oil. |
Wide Range of ApplicationsThe smoke machine leak tester is a special equipment used to detect automobile smoke leakage, which can quickly and accurately locate the pipeline system on automobiles, motorcycles, and ships, as well as the air intake leakage of the system's EVAP system and cooling box. Note: Not applicable to air conditioning system piping. If your machine is not working, there are 4 possible reasons. 1. The power cable is not connected correctly. Only connect a 12V power cable. 2. Wrong oil has been added, we recommend adding baby oil only. (For example, the unit is compatible with JOHNSON'S Baby Oil). 3.Fill with too much oil, 10-20 ml is appropriate. (Note: the appliance does not come with oil). 4. If the pressure is too high during use, the tube in the machine may burst and you will only need to repair it. Friendly Reminder: If you don't know how to use the machine, or if you have any problems due to improper use, you can first email MOTOCOCHE DIRECTfirst and they will try to help you out. |
Safe DesignThe smoke leak tester has a built-in overheating protection mechanism. When the temperature of the device is lower than -15°C or higher than 80°C, it will automatically turn off the power, which can extend its service life. | Fast Smoke OutputBuilt-in independent air pump does not need to rely on other air supply equipment. After connecting to the DC12V battery, it can produce smoke within a few seconds by heating the baby oil. | Adjustable Smoke OutputThe EVAP smoke machine leak detector is equipped with a flow meter to control the size of the smoke output, turning to "+" the smoke becomes larger, and turning to "-" the smoke becomes smaller. |
Determining Leak Condition
| Operation Steps
| Accessories Include1 * Power Cord Clamp 1 * Valve Core Wrench 1 * Smoke Hose 1 * EVAP Special Connector 1 * Universal Easy Intake Adapter 1 * Rubber Connector Parts 8 * Soft Rubber Hose Plugs 8 * Hard Rubber Hose Plugs 1 * Smoke Cone Leak Detector 1 * 100mL Test Oil Refill Bottle |
ADJUSTABLE
| PRESSURE GAUGE
| OIL LEVEL METER
| ALARM INDICATOR
|