Change Toe or Camber ±1° on the rear of GM’s Theta Platform vehicles with this cam nut. Easily make the adjustment you need by installing this cam nut on the toe link’s bolt and then driving change in combination with a cam nut on the camber link. (Note: Most vehicles come with a cam nut on the ‘camber link’ and a standard, non-offset, nut on the ‘toe link.’ Changing toe will affect camber and vice versa.) If the camber cam nut is corroded or missing, use this cam nut in that position as well. You may need up to four (4) cam nuts per vehicle.

Rear Adjustment range: Camber ±1.00° Toe ±1.00°
Install. time: .3 hr/side
Req.: 1 kit per wheel per angle changed