Name: Flux Generator
Model: RD160-B
Material: carbon steel
Applicable welding equipment: manual brazing, automatic
Applicable gas: acetylene, propane, liquefied petroleum gas
Intake pressure: 0.06Mpa
Outlet pressure: 0.05Mpa
Inlet port: 5/16
Outlet port: 5/16
Capacity: 1.5-2L
Air flow: 2m3/H
Wall thickness: 4MM
Size: 200*170MM
Weight: 9KG
1. Suitable for automatic and manual brazing in general operation areas
2. The parent body is made of carbon steel
3. When the flux generator cannot be used normally, check whether the temperer and the pipeline are blocked
4. When adding liquid to the single-can flux generator, it is necessary to stop the machine operation before adding the material
5. The inlet and outlet valves adopt brass globe valves
6. Oxygen is not allowed to enter the flux generator directly under any circumstances
7. Ignite the welding torch, the neutral flame is more suitable for using the flux generator device
8. Install the air flow regulating valve, which can adjust the concentration of flux
9. Before the gas flux enters the tank, please close the regulating valve tightly, wait for the gas flux to atomize in the tank for a period of time, and then open the valve to adjust the gas flow.