CROWN - XTi 1002 - AMPLIFICATEUR DE SONORISATION

Les amplificateurs de la Série XTI sont dédiés à la sonorisation professionnelle mobile de forte puissance.
Leur face avant intègre un écran LCD permettant la sélection de programmes d’usine de configuration d’enceintes et de réglage des différents paramètres : filtrage actif, délai, limiteur.

Caractéristiques

• Programmes d’usine pour enceintes : filtrage actif, EQ, limiteur et délai
• Tout modèle en rack 2U et poids de 8,4 kg (sauf XTI 6002)
• Entrées/ sorties symétriques sur XLR
• Sorties sur borniers protégés et Speakon® 
• Alimentation à découpage
• Ecran LCD de contrôle
• Connecteur USB HiQnet™
• Puissance 2 Ohms : 2 x 700 W*
• Puissance 4 Ohms : 2 x 500 W
• Puissance 8 Ohms : 2 x 275 W
• Puissance 4 Ohms bridgé : 1400 W*
• Puissance 8 Ohms bridgé : 1000 W
• Rapport Signal/Bruit : 100 dBA
• Puissance maxi en Watts au taux de distortion harmonique totale indiqué : 1 kHz, 0,5% DHT. *1 kHz, 1% DHT.
• Taille en U : 2U
• Dimensions : 48,3 x 8,9 x 31,1 cm
• Poids : 8,4 kg

Section DSP

• Correcteur 4 bandes paragraphiques 12 dB, correcteur grave et aigu
• Filtres passe-bas et passe-haut par canal, Butterworth 6/12/18/24 dB par octave. Filtres graves/aigus, un par canal
• Synthétiseur de subharmoniques
• Limiteur de sortie 
• 50 mémoires utilisateur

CROWN - XTi 1002 - Power Amplifier

Crown XTi 2 1002 1000W amplifier with Peak Plus Limiters, Enhanced Sub-harmonic Synth for system specific tuning, updated HiQnet Band Manager and System Architect control software.

Crown XTi 2 1002 Input EQ: 6 parametric filters per channel with adjustable Q, ±15 dB boost/cut. Also adjustable high and low shelving filters. This 8-filter EQ section can be bypassed.

Crossover Filters: Highpass and Lowpass per channel. Butterworth 6/12/18/24 dB per octave. Linkwitz-Riley 24/48 dB per Octave. Also includes ± 15 dB bandpass gain and polarity control.

Output EQ: 8 parametric filters per channel with adjustable Q, ±15 dB boost/cut. This 8-filter EQ section can be bypassed.

Crown XTi 2 1002 SubHarmonic Synth: takes the low-frequency content of the input signal and "synthesizes" a new signal that is the same as the input signal but one octave lower. The new synthesized signal is then mixed with the original signal to create the effect. Users now have control over frequency, gain, and filter type.

Peakx Plus Limiter: User defeatable limiter that allows users to control Threshold, Attack, and Release times.

Features :

• Power: 2 Ohm Stereo (per ch.) 700W, 4 Ohm Stereo (per ch.) 500W, 8 Ohm Stereo (per ch.) 275W, 8 Ohm Bridge-Mono 1000W, 4 Ohm Bridge-Mono 1400W
• Peakx Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
• Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
• 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application
• New system monitoring provides software visibility of AC line voltage and power supply temperature
• Integrated cast-aluminum handles for easy handling and enhanced durability
• Locking power cord clip provides a secure connection between the amplifier and power cord
• Updated HiQnet Band Manager and System Architect control software
• Increased number of presets to a total of 30; 29 of which are user definable
• Delay: For signal alignment of driver; 50 mS of total delay.
• Operating Temperature: 0°C to 40°C at 95% relative humidity (non-condensing)
• Chassis: Steel
• Front Panel: Cast-aluminum
• Cooling: Proportional speed fan with front-to-rear airflow.
• Dimensions 19" (W) x 3.5" (H) x 12.25" (D)

CROWN - XTi 1002 - Power Amplifier

Crown XTi 2 1002 1000W amplifier with Peak Plus Limiters, Enhanced Sub-harmonic Synth for system specific tuning, updated HiQnet Band Manager and System Architect control software.

Crown XTi 2 1002 Input EQ: 6 parametric filters per channel with adjustable Q, ±15 dB boost/cut. Also adjustable high and low shelving filters. This 8-filter EQ section can be bypassed.

Crossover Filters: Highpass and Lowpass per channel. Butterworth 6/12/18/24 dB per octave. Linkwitz-Riley 24/48 dB per Octave. Also includes ± 15 dB bandpass gain and polarity control.

Output EQ: 8 parametric filters per channel with adjustable Q, ±15 dB boost/cut. This 8-filter EQ section can be bypassed.

Crown XTi 2 1002 SubHarmonic Synth: takes the low-frequency content of the input signal and "synthesizes" a new signal that is the same as the input signal but one octave lower. The new synthesized signal is then mixed with the original signal to create the effect. Users now have control over frequency, gain, and filter type.

Peakx Plus Limiter: User defeatable limiter that allows users to control Threshold, Attack, and Release times.

Features :

• Power: 2 Ohm Stereo (per ch.) 700W, 4 Ohm Stereo (per ch.) 500W, 8 Ohm Stereo (per ch.) 275W, 8 Ohm Bridge-Mono 1000W, 4 Ohm Bridge-Mono 1400W
• Peakx Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
• Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
• 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application
• New system monitoring provides software visibility of AC line voltage and power supply temperature
• Integrated cast-aluminum handles for easy handling and enhanced durability
• Locking power cord clip provides a secure connection between the amplifier and power cord
• Updated HiQnet Band Manager and System Architect control software
• Increased number of presets to a total of 30; 29 of which are user definable
• Delay: For signal alignment of driver; 50 mS of total delay.
• Operating Temperature: 0°C to 40°C at 95% relative humidity (non-condensing)
• Chassis: Steel
• Front Panel: Cast-aluminum
• Cooling: Proportional speed fan with front-to-rear airflow.
• Dimensions 19" (W) x 3.5" (H) x 12.25" (D)

CROWN - XTi 1002 - Power Amplifier

Crown XTi 2 1002 1000W amplifier with Peak Plus Limiters, Enhanced Sub-harmonic Synth for system specific tuning, updated HiQnet Band Manager and System Architect control software.

Crown XTi 2 1002 Input EQ: 6 parametric filters per channel with adjustable Q, ±15 dB boost/cut. Also adjustable high and low shelving filters. This 8-filter EQ section can be bypassed.

Crossover Filters: Highpass and Lowpass per channel. Butterworth 6/12/18/24 dB per octave. Linkwitz-Riley 24/48 dB per Octave. Also includes ± 15 dB bandpass gain and polarity control.

Output EQ: 8 parametric filters per channel with adjustable Q, ±15 dB boost/cut. This 8-filter EQ section can be bypassed.

Crown XTi 2 1002 SubHarmonic Synth: takes the low-frequency content of the input signal and "synthesizes" a new signal that is the same as the input signal but one octave lower. The new synthesized signal is then mixed with the original signal to create the effect. Users now have control over frequency, gain, and filter type.

Peakx Plus Limiter: User defeatable limiter that allows users to control Threshold, Attack, and Release times.

Features :

• Power: 2 Ohm Stereo (per ch.) 700W, 4 Ohm Stereo (per ch.) 500W, 8 Ohm Stereo (per ch.) 275W, 8 Ohm Bridge-Mono 1000W, 4 Ohm Bridge-Mono 1400W
• Peakx Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
• Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
• 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application
• New system monitoring provides software visibility of AC line voltage and power supply temperature
• Integrated cast-aluminum handles for easy handling and enhanced durability
• Locking power cord clip provides a secure connection between the amplifier and power cord
• Updated HiQnet Band Manager and System Architect control software
• Increased number of presets to a total of 30; 29 of which are user definable
• Delay: For signal alignment of driver; 50 mS of total delay.
• Operating Temperature: 0°C to 40°C at 95% relative humidity (non-condensing)
• Chassis: Steel
• Front Panel: Cast-aluminum
• Cooling: Proportional speed fan with front-to-rear airflow.
• Dimensions 19" (W) x 3.5" (H) x 12.25" (D)

CROWN - XTi 1002 - Power Amplifier

Crown XTi 2 1002 1000W amplifier with Peak Plus Limiters, Enhanced Sub-harmonic Synth for system specific tuning, updated HiQnet Band Manager and System Architect control software.

Crown XTi 2 1002 Input EQ: 6 parametric filters per channel with adjustable Q, ±15 dB boost/cut. Also adjustable high and low shelving filters. This 8-filter EQ section can be bypassed.

Crossover Filters: Highpass and Lowpass per channel. Butterworth 6/12/18/24 dB per octave. Linkwitz-Riley 24/48 dB per Octave. Also includes ± 15 dB bandpass gain and polarity control.

Output EQ: 8 parametric filters per channel with adjustable Q, ±15 dB boost/cut. This 8-filter EQ section can be bypassed.

Crown XTi 2 1002 SubHarmonic Synth: takes the low-frequency content of the input signal and "synthesizes" a new signal that is the same as the input signal but one octave lower. The new synthesized signal is then mixed with the original signal to create the effect. Users now have control over frequency, gain, and filter type.

Peakx Plus Limiter: User defeatable limiter that allows users to control Threshold, Attack, and Release times.

Features :

• Power: 2 Ohm Stereo (per ch.) 700W, 4 Ohm Stereo (per ch.) 500W, 8 Ohm Stereo (per ch.) 275W, 8 Ohm Bridge-Mono 1000W, 4 Ohm Bridge-Mono 1400W
• Peakx Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
• Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
• 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application
• New system monitoring provides software visibility of AC line voltage and power supply temperature
• Integrated cast-aluminum handles for easy handling and enhanced durability
• Locking power cord clip provides a secure connection between the amplifier and power cord
• Updated HiQnet Band Manager and System Architect control software
• Increased number of presets to a total of 30; 29 of which are user definable
• Delay: For signal alignment of driver; 50 mS of total delay.
• Operating Temperature: 0°C to 40°C at 95% relative humidity (non-condensing)
• Chassis: Steel
• Front Panel: Cast-aluminum
• Cooling: Proportional speed fan with front-to-rear airflow.
• Dimensions 19" (W) x 3.5" (H) x 12.25" (D)