Honeywell HMC6343-DEMO Magnetic Digital Compass Sensor Evaluation Board
This is a Brand New Honeywell Aerospace HMC6343 Magnetic Digital Compass Sensor Evaluation Dev Demo Board. Does not! include a DVD, cable, or any other peripheral with exception to what is shown in the pictures.
Product Overview
The HMC6343-DEMO is a fully integrated compass module that includes firmware for heading computation and calibration for magnetic distortions. The module combines three axis magneto resistive sensors and three axis MEMS accelerometers, analog and digital support circuits, microprocessor and algorithms required for heading computation. By combining the sensor elements, processing electronics, and firmware into a 9mm x 9mm x 1.9mm LCC package, Honeywell offers a complete, ready to use tilt compensated electronic compass. This provides design engineers with the simplest solution to integrate high volume, cost effective compasses into binoculars, cameras, night vision optics, laser ranger finders, antenna positioning, and other industrial compassing applications. The HMC6343 utilizes anisotropic magneto resistive (AMR) technology that provides advantages over other magnetic sensor technologies.
Compass algorithms
For computation of heading, and magnetic calibration for hard iron
Compatible with battery powered applications
To store compass data for processor routines
I2C Interface, easy to use two wire communication for heading output
Typical two degree heading accuracy with one degree pitch and roll accuracy
Moderate precision outputs
EEPROM memory
Applications
Industrial, Imaging, Video & Vision, Portable Devices, Power Management
Warnings
This part is sensitive to damage by electrostatic discharge. Use ESD precautionary procedures when touching, removing or inserting.
HMC6343 Digital Compass
Solution
The Honeywell HMC6343 digital compass
circuit is a 3-axis magnetic and 3-axis
accelerometer compassing solution with tilt
compensation. This 9.0mm x 9.0mm x
1.9mm multi-chip module has a I2C UART
interface plus command compatibility with
the HMR3300/3400 compass solutions.
The HMC6343 contains all sensors, micro-
controller, and analog support circuits;
plus all the firmware for heading computa-
tion and hard-iron calibration.
Applications
• Consumer electronics
• Hand held devices (cell phones, PDAs,
watches, handheld GPS)
• Compassing
• Integration with GPS
• Vehicle compassing and telematics
• Satellite dish antenna positioning
Features and benefits
Integration: Drop-in, plug and play fea-
ture allows for more high volume produc-
tion. 3-Axis Magnetic Sensors plus 3-axis
accelerometers with Electronics and
Microprocessor
Size: HMC6343 comes in a Miniature 9.0
x 9.0 x 1.9mm Pin LCC Package
Power: 2.6 to 3.7 volt supply voltage for
battery operation
Performance: 2.5 to 3 degrees typical
compassing accuracy at level
Product Overview
The HMC6343-DEMO is a fully integrated compass module that includes firmware for heading computation and calibration for magnetic distortions. The module combines three axis magneto resistive sensors and three axis MEMS accelerometers, analog and digital support circuits, microprocessor and algorithms required for heading computation. By combining the sensor elements, processing electronics, and firmware into a 9mm x 9mm x 1.9mm LCC package, Honeywell offers a complete, ready to use tilt compensated electronic compass. This provides design engineers with the simplest solution to integrate high volume, cost effective compasses into binoculars, cameras, night vision optics, laser ranger finders, antenna positioning, and other industrial compassing applications. The HMC6343 utilizes anisotropic magneto resistive (AMR) technology that provides advantages over other magnetic sensor technologies.
Compass algorithms
For computation of heading, and magnetic calibration for hard iron
Compatible with battery powered applications
To store compass data for processor routines
I2C Interface, easy to use two wire communication for heading output
Typical two degree heading accuracy with one degree pitch and roll accuracy
Moderate precision outputs
EEPROM memory
Applications
Industrial, Imaging, Video & Vision, Portable Devices, Power Management
Warnings
This part is sensitive to damage by electrostatic discharge. Use ESD precautionary procedures when touching, removing or inserting.
HMC6343 Digital Compass
Solution
The Honeywell HMC6343 digital compass
circuit is a 3-axis magnetic and 3-axis
accelerometer compassing solution with tilt
compensation. This 9.0mm x 9.0mm x
1.9mm multi-chip module has a I2C UART
interface plus command compatibility with
the HMR3300/3400 compass solutions.
The HMC6343 contains all sensors, micro-
controller, and analog support circuits;
plus all the firmware for heading computa-
tion and hard-iron calibration.
Applications
• Consumer electronics
• Hand held devices (cell phones, PDAs,
watches, handheld GPS)
• Compassing
• Integration with GPS
• Vehicle compassing and telematics
• Satellite dish antenna positioning
Features and benefits
Integration: Drop-in, plug and play fea-
ture allows for more high volume produc-
tion. 3-Axis Magnetic Sensors plus 3-axis
accelerometers with Electronics and
Microprocessor
Size: HMC6343 comes in a Miniature 9.0
x 9.0 x 1.9mm Pin LCC Package
Power: 2.6 to 3.7 volt supply voltage for
battery operation
Performance: 2.5 to 3 degrees typical
compassing accuracy at level
We’re e-liquidators.
We specialize in Military, Government, Industrial and Business liquidation services, disposition and asset recovery management.
Our surplus inventory comes to us from many sources, big and small: corporate clients, closing businesses, military DRMO’s, and local government agencies, and individuals.
Feel free to contact us with your questions, concerns and suggestions.
Contact information:
We are "E-liquidators" on Facebook
Google “E-liquidators” for additional information
Please take a moment to see our current specials on eBay our other eBay listings.
Powered by SixBit's eCommerce Solution