Hornady Lock N Load case feeder 3d printed black. 

This case feeder will run most calibers except 10mm. So in other words, there are 4 turret holes: the first hole will run 223/300 blackout, the other three will run anything within the two listed diameters. 2nd, (listed 44M/ 45 LC) .357/45 long colt, 3rd. 45/9mm, 4th, 8mm/30-06. Condition is "New" Fully assembled! You will need the following: 2x 1/4"-20 x 3/4" long bolts to mount this to your press (it is your responsibility to make sure you have a newer style press with the mounting holes on the back to accept the two 1/4 X20 bolts to mount a case feeder!) & 3 small 5/8 sheet metal screws if you want to mount the stabilizer to your reloading bench. It takes some time getting the mounting height correct, and the pawls on the Lock-N-Load might need some tweaking. But you could see below the final result is most satisfying! this case feeder dose all calibers including all rifle calibers. These come with a lifetime warranty, just send pictures of parts and cover the shipping! Please note this unit also comes with 4 tubes. See Video for the working case feeder below. ►

https://www.youtube.com/embed/rXjUNVNkylU?rel=0

If your looking for any bullet feeders kits or bullet feeder dies and other reloading accessories check out my affiliates links!

https://www.osceolagunworks.com/?fbclid=IwAR2FyaYoabtarNtlEddonL_sp8D6G1kYzpuZmwQqwqyQ2tHXcbFELCX6ol0

https://www.etsy.com/shop/LMreloading?ref=simple-shop-header-name&listing_id=1170313851

https://www.ebay.com/sch/usmich-zws6lsacw/m.html?_trkparms=folent%3Ausmich-zws6lsacw%7Cfolenttp%3A1&_trksid=p3542580.m47492.l71970