Advantageous features of the 2G Wind Power Grid Tie Inverter

* the mains inverter of the 2nd generation, new technical, higher efficiency. * Higher MPPT efficiency, max. 99% * Multiple intelligent protection for safe use. * Connect directly to a three-phase wind turbine without a regulator * Easy to install and easy to use. * Two year warranty, lifetime technical support. * Pure sine wave output * Built-in dump loading function * Two year warranty, lifetime technical support. * Power limitation function

The electricity meter slows down. REDUCED electricity costs.

The wind grid inverter can draw wind energy from the wind turbine and can be connected to the grid via its output cables without additional equipment. The installation is very convenient and reliable. The inverter can be connected to all sockets in the house network. The inverter with a small grid connection monitors the volume, the frequency and the phase of the home network and then generates pure sinusoidal alternating current, the frequency and phase of which are identical to that of the network and whose volume is then slightly higher than that of the network to the current-controlled PWM, to control the output power to the grid. The small inverter with a grid connection only outputs electricity when the home grid is switched on. When the wind turbine rotates and the voltage output is in the range of the nominal input voltage of the inverter, the wind turbine generates electricity and the grid-connected inverter changes the power from the wind turbine to the output grid. If the total power of the electrical devices used in the house is greater than the output power of the inverters, this power is consumed by the inverters in the house, which slows down the power meter, otherwise the difference in the power of the inverter between the total power consumed by the device is taken from the House delivered to the output network.

Power limiter function

Why do our line inverters need a limit function? --- It is a response to the overwhelming demand from our customers for a feature that can control the amount of electricity the line inverters can produce. With this function, the inverters only generate electricity no larger than the power of the loads, even if the inverters are connected to a solar panel with a large power. We call this the "limit value function". Because in some countries the producer pays for the excess electricity that he feeds into the distribution network. This is because the electricity meter (the one provided by the local utility company) does not know the direction of electricity flow. In other words, it is only added even if electricity is exported to the grid. Hence, electricity will be billed to the consumer even if it is fed into the grid, and this is the problem. Our SUN G2 series power inverters are integrated into this limit value function, so that SUN G2 series inverters can work in limit value mode or in normal mode (without limit value). You can make the configuration on the LCD display.

Technical specifications

Model: 2000GTIL-WAL-LCD Max. Output power: 2000W Input AC / DC voltage range: 45 V ~ 90 V. AC output voltage range: 185-265 VAC Output frequency: 46Hz ~ 65Hz Standby power consumption: <0.5 W. Harmonics Total Distortion: <5% Inverter Peak Efficiency: 92% Power Factor: 0.99 Output Waveform: Pure Sine Wave MPPT Efficiency: 99% Over Current Protection: Yes Over Temperature Protection: Yes Reverse Polarity Protection: Yes Anti Island Protection: Yes Stackable: Yes Weight (kg): 7.5 kg Dimensions (W x H x D): 322 x 196 x 88 mm

Packing list

1. Wind power grid inverter ---- 1 pc., 2. Tipping load resistance --- 1 pc., 3. AC cable --1 pc., 4. Operating instructions & warranty card. 5. Limiter sensor / clamp / cable ---- optional.