Toyota pickup vintage style graphic set

• color its silver non metallic for other colors available contatc us before buying
• This pictures are for display of the graphics only, they are not the actual graphics
• graphics will be identical close enough! actual graphics will be made on a single and solid color
• pictures belong to private party, Color is silver semi metallic, vintage style for models 85 to 87

***NOTE***

Kit Toyota retro pickup Vintage style Vinyl Decals graphics stickers. THIS GRAPHICS ARE CUT STRAIGHT OF SOLID COLOR VINYL.THIS ARE  NOT PRINTED OR FADED LIKE THE ORIGINAL DESIGN) pictures are only for display of the graphics, READ (This are not intend to match the exact size and dimensions of the factory ones!!!)

KIT INCLUDES:

• Right and Left Sides and tailgate graphics
• Hexis professional grade Vinyl INSTALLATION INSTRUCTIONS

TIP 1: USE THE WET METHOD

You can apply most smaller decals without using water, but for large and very large stickers, this trick is a life-saver. After cleaning your surface area, wet the area again using a spray bottle and a solution of about 5% soap / 95% water. Apply the sticker while the area is still wet. This will keep it from adhering immediately and give you time to reposition if necessary. It also enables you to remove any bubbles using a squeegee or a plastic card. The soapy water will dry in a few minutes and leave your sticker firmly affixed.

TIP 2: TEND TO THE TRANSFER TAPE

Many of our stickers come with three layers: 1) transfer tape, the clear top layer that clings to the non-adhesive side of the sticker and holds the sticker together; 2) the sticker, the middle layer; 3) backing paper, the bottom layer of white paper that clings to the adhesive side of the sticker.

Before applying these types of stickers, it’s important to make sure the sticker and transfer tape are pressed firmly together. To do so, apply pressure evenly across the transfer tape with a squeegee or a plastic card. This will ensure that the sticker doesn’t come up with the backing paper during installation.

Also, once you’ve applied your sticker, be sure to leave the transfer tape in place for at least 20 MINS before gently removing it. In very cold winter months, you may need to leave the transfer tape on even longer. To speed up the process when it’s cold out, you can warm the application surface using a blow dryer on low heat.

Now that you know the tricks the experts use for applying stickers, you should be able to get it right every time! But just in case you want even more information, you can find step-by-step instructions and more tips at YOUTUBE

TIP 3: START WITH A CLEAN SURFACE

Pre-wash the area where you’ll be applying the sticker using either soap and water or a mixture of rubbing alcohol (70% isopropyl alcohol) and water—we recommend a 50 / 50 water / alcohol solution. After cleaning with soapy water, rinse thoroughly with water until no soap or residue remains. Do not use window-cleaning products. They may leave a residue behind, making your sticker cling less effectively.