How to set:
1. The original password is 0-0-0-0-0, suggest re-set your own combination follow below steps.
2. Take out the protecter by using cross screwdriver.
3. Push the reset button to the "SET" position.4. Set your own combination by turning dials, be sure
the numbers are on the convex line. (e.g.88888)
4. Put the reset button back to normal, and then lid the protecter by cross screwdriver.
5. At this point, the setting is completed, your new password has been set already.
How to Lock:
1. The car parked, degrees off the engine, and pull the handbrake lever.Then take out
anti-theft lock.
2. Select the correct combination to align with both notches.
3. Let both end of the lock cross the steering wheel ring, and then tighten the lock out
the fork ends and make arbitrary code, so that the lock can no longer be opened.
How to Unlock:
1 .Turn the correct combination to align with both notches.
2.Let the fork ends to inside lock away, you can remove the lock.
This item is deliver from Sydney or Melbourne warehouse. If you are in Australia, you will get it very soon. If you offer other address, we will send it from China.