Features for AC600 Wireless Indoor/Outdoor Access Point, Outdoor WiFi Extender
Withstand Harsh Outdoor Climates- IP65-rated weatherproof housing that ensures continued operation in harsh outdoor environments or
in climates of extreme cold, heat or continuous moisture; Robust weatherproof case withstands harsh outdoor conditions;
Withstanding broad ranges of humidity and temperature (-30°C~70°C) (-22°F~158°F); 15KV ESD, 4KV lightning protection,
ensure stable connection in harsh outdoor conditions
Say Goodbye to Weak Wi-Fi Signal- This WiFi Signal Booster comes with next generation 802.11AC Wi-Fi technology,
dual band external antennas provides up to 2.4GHz 150Mbps and 5GHz 433Mbps. Resolve the problem with a weak signal in an excellent manner,
help to boost WiFi signal strength.The WAN port support 100Mbps.
Multi Operation Modes - The Outdoor Wi-Fi Access Point has integrated Power over Ethernet (PoE) support, allowing it to be installed in areas where
power outlets are not readily available by combing your power and network data connection into a single RJ-45 cable.Support Repeater, AP,Router and
WISP as operating modes. In AP mode, it provides Access Point, Client, Client Repeater modes for wireless solutions,you can use
for different modes as you wish, Support 3 LEDs wireless signal strength.
Built-in High Power Amplifiers - High Power Amplifiers PA+LNA 600mW and enhanced receiver design increase transmission power up to 5x .
More strong penetration & longer range coverage than the general access point, ideal for providing Wi-Fi service in big area such as factory,
community, street or etc. Feature 2 x RP-SMA connectors for external antennas, and higher antenna gain extensively strengthens Wi-Fi signal
and expands wider coverage in the open air.
2 x 7dBi Detachable Omni Directional Antennas - Feature 2 x RP-SMA connectors for external antennas, and higher antenna gain
extensively strengthens Wi-Fi signal and expands wider coverage in the open air, stability technology automatically avoids channel conflicts
using its channel selection feature, meet outdoor long range coverage wireless network requirement, cover hard-to-reach dead zones.
Specifications:
1.Operating Temperature: -30°C~70°C(-22 ~158F)
2.Storage Temperature: -40°C~70°C(-40~158F)
3.Power Plug: AU Plug
4.Voltage: 100-240V
5.Support 2.4 GHz 5GHz
6.Standard:802.11 ac/a/b/g/n
7.Maximum WLAN security with WPA2,WPA and WEP(128/64)
8.Distance:Outdoor 500m(Change with the Actual Environment), If you use another outdoor wavlink device to
repeat the signal of the 1st wavlink outdoor device,the signal could reach 1000m.
What’s in the package?
1 x WiFi AP/Router
2 x Antenna
1 x power Adapter
1 x POE Converter
1 x RJ-45 Networking Cable
1 x Main body holder
1 x Screw fitting
2 x Cable ties
1 x Quick Installation Guide
Note:
1. Make sure to use a certified CAT5e/CAT6 Ethernet cable with RJ45 connectors.
2. Make sure the length of the Ethernet cable is less than 60 meters (196 ft).
3. Not Compatible with Mesh Routers.
4. Select the wireless network with a signal strength greater than 70% to get the most reliable connection.
5. The outdoor antenna should be installed at a height of 2 meters above the roof or in a high open place for better reception.
Easy to Setup with Power Over Ethernet(POE)
This Wireless Wifi Booster has integrated Power over Ethernet (PoE) support, allowing it to be installed in areas where power outlets are
not readily available. By combing your power and network data connection into a single RJ-45 cable, you can install the Wifi Booster
in hard to reach location without worrying about running both power and Ethernet cables.
Flexible Installation
Secure access points to walls or poles with the mounting kits provided .