KALI AUDIO - MM-6 - Paire de moniteurs multimédia bi-amplifiés 6,5"

Le MM-6 est acoustiquement identique au moniteur de studio LP-6 le plus vendu. Vous pouvez trouver des moniteurs de studio Kali dans les meilleurs studios du monde. Leur précision, leurs performances et leurs détails en font le meilleur choix pour les musiciens et producteurs lauréats de GRAMMY, les studios de cinéma et de télévision et les créateurs travaillant dans des formats immersifs tels que Dolby Atmos. Si vous avez écouté de la musique, regardé la télévision ou été au cinéma ces dernières années, vous avez certainement entendu quelque chose créé sur les moniteurs de studio Kali Audio.

Cela signifie que lorsque vous écoutez votre MM-6, vous entendez les choses exactement comme les créateurs l'ont voulu. Rien n'est supprimé et rien n'est noyé. Tout est entendu avec une clarté parfaite, vous permettant de vous immerger dans l'expérience et d'en profiter au maximum.

Le MM-6 est conçu pour avoir une sortie continue de 85 dB à 2,2 mètres avec une marge de 20 dB. En pratique, cela signifie que le haut-parleur a suffisamment de puissance pour une écoute à long terme à un niveau sûr dans la plupart des environnements domestiques.

Une marge de 20 dB garantit que les pics actuels de niveau de pression acoustique, y compris des instruments tels qu'une grosse caisse et des effets tels que des explosions ou des coups de feu, peuvent être reproduits avec précision et avec une distorsion minimale.

Le MM-6 est équipé d'un circuit limiteur pour protéger le haut-parleur des niveaux de tension dangereux. En d'autres termes, vous n'avez pas à vous soucier de faire exploser le haut-parleur en jouant trop fort.

Les tensions dangereuses seront clairement audibles sous forme de distorsion, indiquant que le haut-parleur reçoit trop d'entrée. Dans ce cas, il est recommandé de baisser le volume du matériel de lecture.

L'ouverture sous le woofer sur le MM-6 s'appelle un tube de port et est utilisée pour donner à votre haut-parleur des basses supplémentaires sans avoir à utiliser un woofer plus grand et plus cher.
La plupart des tubes de port créent un bruit gênant qui augmente le niveau de bruit de votre système et brouille les basses fréquences. Pour cette raison, la plupart des tubes de port sont situés à l'arrière de l'enceinte, ce qui rend difficile de placer l'enceinte près d'un mur.
La conception du tube de port sur le MM-6 élimine ce problème, vous permettant de placer le haut-parleur contre un mur ou une autre limite sans entendre de bruit ou d'autres problèmes causés par le tube de port.

Le guide d'ondes d'imagerie 3D vous permet d'entendre une scène sonore tridimensionnelle à partir d'une paire de haut-parleurs stéréo. En adaptant la forme du guide d'ondes aux interactions des transducteurs HF et LF, ce guide d'ondes crée une image stéréo continue plus large, plus haute et plus profonde que l'espace dans lequel les haut-parleurs sont placés. Cela signifie également que si vous écoutez dans un format surround ou immersif, vous pourrez entendre une image détaillée du son entre les haut-parleurs et tout autour de vous.
L'équipe Kali a développé un guide d'ondes d'imagerie 3D pour faciliter le mixage, mais cela signifie également que le MM-6 et les autres haut-parleurs qui l'utilisent fonctionnent mieux dans les pièces acoustiquement difficiles et sont plus
plus agréable pour une écoute longue durée

Le MM-6 est équipé d'un traitement numérique du signal (DSP). Le DSP contrôle le réglage des haut-parleurs, la fonction limiteur, le crossover, l'égaliseur limite et l'écrêtage HF et LF définissable par l'utilisateur.

La série LP utilise un woofer avec une bobine acoustique et un aimant exceptionnellement grands. Cela permet une plus grande linéarité, résultant en une plage dynamique et une clarté exceptionnelles, ainsi qu'une réponse étendue en basse fréquence.
Tout cela est réalisé avec une distorsion minimale.

Les égaliseurs de compensation de limite sur le MM-6 vous permettent de placer les haut-parleurs n'importe où dans votre environnement d'écoute. Combinés aux garnitures LF et HF, ils garantissent que les haut-parleurs sonnent au mieux, peu importe où ils sont placés.

Caractéristiques :

• Type de pilote LF Woofer With Paper Diaphragm
• Amplificateur de puissance pilote LF 40W
• Type de pilote HF Textile Dome Tweeter
• Amplificateur de puissance pilote HF 40W
• Contrôles Volume, Trim
• Bluetooth Pas
• ADAT Pas
• Propriétés
• Gamme de fréquences 39 Hz - 25 kHz
• Haut-parleur de basse 6,5"
• Tweeter 1"
• Port bass-reflex Oui
• Fréquence de coupure 1500 Hz
• Couleur Noir
• Entrées et sorties
• Entrées Coaxial S/PDIF, Optique, RCA stereo Input, XLR
• AUX IN Pas
• Sorties XLR
• USB Pas
• S/PDIF Oui
• Acoustique
• Configuration d'amplification Bi-amp
• Puissance RMS (Watt) 80
• Puissance RMS 80 W
• Pression sonore maximale (SPL) 115db
• Paquet
• Quantité de paquet (pcs) 1
• Contenu du coffret
• Câble d'alimentation, Manuel, Télécommande
• Alimentation
• Source de courant
• 100V - 240V
• Accessoires
• Télécommande
• Oui
• Dimensions et poids
• Largeur (cm) 22,2
• Profondeur (cm) 26
• Hauteur (cm) 35,9
• Poids net (kg) 7,05
• Fabriquée au Chine

KALI AUDIO - MM-6 - Pair of 6.5" bi-amplified multimedia monitors

The MM-6 is acoustically identical to the best-selling LP-6 studio monitor. Kali studio monitors can be found in the world's finest studios. Their accuracy, performance and detail make them the best choice for GRAMMY Award-winning musicians and producers, film and TV studios, and designers working in immersive formats such as Dolby Atmos. If you've listened to music, watched TV or been to the cinema in the last few years, you've probably heard something created by Kali Audio studio monitors.

This means that when you listen to your MM-6, you hear things exactly as the creators intended. Nothing is suppressed and nothing is drowned out. Everything is heard with perfect clarity, allowing you to immerse yourself in the experience and enjoy it to the full.

The MM-6 is designed to produce a continuous output of 85dB at 2.2 metres with a 20dB headroom. In practice, this means that the speaker has enough power for long-term listening at a safe level in most domestic environments.

A 20dB margin ensures that actual peaks in sound pressure levels, including instruments such as a bass drum and effects such as explosions or gunshots, can be accurately reproduced with minimal distortion.

The MM-6 is equipped with a limiter circuit to protect the loudspeaker from dangerous voltage levels. In other words, you don't have to worry about blowing up the speaker by playing too loud.

Dangerous voltages will be clearly audible as distortion, indicating that the speaker is receiving too much input. In this case, it is advisable to lower the volume of the playback equipment.

The opening below the woofer on the MM-6 is called a port tube and is used to give your speaker extra bass without having to use a larger, more expensive woofer.
Most port tubes create an annoying noise that increases the noise level of your system and interferes with low frequencies. For this reason, most port tubes are located at the rear of the speaker, making it difficult to place the speaker close to a wall.
The port tube design on the MM-6 eliminates this problem, allowing you to place the speaker against a wall or other boundary without hearing noise or other problems caused by the port tube.

The 3D imaging waveguide allows you to hear a three-dimensional soundstage from a pair of stereo loudspeakers. By adapting the shape of the waveguide to the interactions of the HF and LF transducers, this waveguide creates a continuous stereo image that is wider, higher and deeper than the space in which the speakers are placed. It also means that if you're listening in a surround or immersive format, you'll be able to hear a detailed image of the sound between the speakers and all around you.
The Kali team have developed a 3D imaging waveguide to make mixing easier, but it also means that the MM-6 and other speakers that use it work better in acoustically challenging rooms and are more
more pleasant for long-duration listening

The MM-6 is equipped with Digital Signal Processing (DSP). The DSP controls the speaker settings, limiter function, crossover, limit equaliser and user-definable HF and LF clipping.

The LP series uses a woofer with an exceptionally large voice coil and magnet. This allows for greater linearity, resulting in exceptional dynamic range and clarity, as well as extended low-frequency response.
All this is achieved with minimal distortion.

The boundary compensation equalisers on the MM-6 allow you to place the speakers anywhere in your listening environment. Combined with the LF and HF trims, they ensure that the speakers sound their best wherever they are placed.

Features:

• Driver Type LF Woofer With Paper Diaphragm
• Driver Power Amplifier LF 40W
• HF Driver Type Textile Dome Tweeter
• HF 40W Pilot Power Amplifier
• Controls Volume, Trim
• Bluetooth Not
• ADAT Not
• Properties
• Frequency range 39 Hz - 25 kHz
• 6.5" bass driver
• 1" tweeter
• Bass reflex port Yes
• Crossover frequency 1500 Hz
• Colour Black
• Inputs and outputs
• Coaxial S/PDIF, Optical, RCA stereo Input, XLR
• AUX IN No
• XLR outputs
• USB No
• S/PDIF Yes
• Acoustics
• Amplifier configuration Bi-amp
• RMS power (Watt) 80
• RMS power 80 W
• Maximum sound pressure level (SPL) 115db
• Package
• Package quantity (pcs) 1
• Package contents
• Power cable, Manual, Remote control
• Power supply
• Power source
• 100V - 240V
• Accessories
• Remote control
• Yes
• Dimensions and weight
• Width (cm) 22.2
• Depth (cm) 26
• Height (cm) 35.9
• Net weight (kg) 7.05
• Made in China

KALI AUDIO - MM-6 - Pair of 6.5" bi-amplified multimedia monitors

The MM-6 is acoustically identical to the best-selling LP-6 studio monitor. Kali studio monitors can be found in the world's finest studios. Their accuracy, performance and detail make them the best choice for GRAMMY Award-winning musicians and producers, film and TV studios, and designers working in immersive formats such as Dolby Atmos. If you've listened to music, watched TV or been to the cinema in the last few years, you've probably heard something created by Kali Audio studio monitors.

This means that when you listen to your MM-6, you hear things exactly as the creators intended. Nothing is suppressed and nothing is drowned out. Everything is heard with perfect clarity, allowing you to immerse yourself in the experience and enjoy it to the full.

The MM-6 is designed to produce a continuous output of 85dB at 2.2 metres with a 20dB headroom. In practice, this means that the speaker has enough power for long-term listening at a safe level in most domestic environments.

A 20dB margin ensures that actual peaks in sound pressure levels, including instruments such as a bass drum and effects such as explosions or gunshots, can be accurately reproduced with minimal distortion.

The MM-6 is equipped with a limiter circuit to protect the loudspeaker from dangerous voltage levels. In other words, you don't have to worry about blowing up the speaker by playing too loud.

Dangerous voltages will be clearly audible as distortion, indicating that the speaker is receiving too much input. In this case, it is advisable to lower the volume of the playback equipment.

The opening below the woofer on the MM-6 is called a port tube and is used to give your speaker extra bass without having to use a larger, more expensive woofer.
Most port tubes create an annoying noise that increases the noise level of your system and interferes with low frequencies. For this reason, most port tubes are located at the rear of the speaker, making it difficult to place the speaker close to a wall.
The port tube design on the MM-6 eliminates this problem, allowing you to place the speaker against a wall or other boundary without hearing noise or other problems caused by the port tube.

The 3D imaging waveguide allows you to hear a three-dimensional soundstage from a pair of stereo loudspeakers. By adapting the shape of the waveguide to the interactions of the HF and LF transducers, this waveguide creates a continuous stereo image that is wider, higher and deeper than the space in which the speakers are placed. It also means that if you're listening in a surround or immersive format, you'll be able to hear a detailed image of the sound between the speakers and all around you.
The Kali team have developed a 3D imaging waveguide to make mixing easier, but it also means that the MM-6 and other speakers that use it work better in acoustically challenging rooms and are more
more pleasant for long-duration listening

The MM-6 is equipped with Digital Signal Processing (DSP). The DSP controls the speaker settings, limiter function, crossover, limit equaliser and user-definable HF and LF clipping.

The LP series uses a woofer with an exceptionally large voice coil and magnet. This allows for greater linearity, resulting in exceptional dynamic range and clarity, as well as extended low-frequency response.
All this is achieved with minimal distortion.

The boundary compensation equalisers on the MM-6 allow you to place the speakers anywhere in your listening environment. Combined with the LF and HF trims, they ensure that the speakers sound their best wherever they are placed.

Features:

• Driver Type LF Woofer With Paper Diaphragm
• Driver Power Amplifier LF 40W
• HF Driver Type Textile Dome Tweeter
• HF 40W Pilot Power Amplifier
• Controls Volume, Trim
• Bluetooth Not
• ADAT Not
• Properties
• Frequency range 39 Hz - 25 kHz
• 6.5" bass driver
• 1" tweeter
• Bass reflex port Yes
• Crossover frequency 1500 Hz
• Colour Black
• Inputs and outputs
• Coaxial S/PDIF, Optical, RCA stereo Input, XLR
• AUX IN No
• XLR outputs
• USB No
• S/PDIF Yes
• Acoustics
• Amplifier configuration Bi-amp
• RMS power (Watt) 80
• RMS power 80 W
• Maximum sound pressure level (SPL) 115db
• Package
• Package quantity (pcs) 1
• Package contents
• Power cable, Manual, Remote control
• Power supply
• Power source
• 100V - 240V
• Accessories
• Remote control
• Yes
• Dimensions and weight
• Width (cm) 22.2
• Depth (cm) 26
• Height (cm) 35.9
• Net weight (kg) 7.05
• Made in China

KALI AUDIO - MM-6 - Pair of 6.5" bi-amplified multimedia monitors

The MM-6 is acoustically identical to the best-selling LP-6 studio monitor. Kali studio monitors can be found in the world's finest studios. Their accuracy, performance and detail make them the best choice for GRAMMY Award-winning musicians and producers, film and TV studios, and designers working in immersive formats such as Dolby Atmos. If you've listened to music, watched TV or been to the cinema in the last few years, you've probably heard something created by Kali Audio studio monitors.

This means that when you listen to your MM-6, you hear things exactly as the creators intended. Nothing is suppressed and nothing is drowned out. Everything is heard with perfect clarity, allowing you to immerse yourself in the experience and enjoy it to the full.

The MM-6 is designed to produce a continuous output of 85dB at 2.2 metres with a 20dB headroom. In practice, this means that the speaker has enough power for long-term listening at a safe level in most domestic environments.

A 20dB margin ensures that actual peaks in sound pressure levels, including instruments such as a bass drum and effects such as explosions or gunshots, can be accurately reproduced with minimal distortion.

The MM-6 is equipped with a limiter circuit to protect the loudspeaker from dangerous voltage levels. In other words, you don't have to worry about blowing up the speaker by playing too loud.

Dangerous voltages will be clearly audible as distortion, indicating that the speaker is receiving too much input. In this case, it is advisable to lower the volume of the playback equipment.

The opening below the woofer on the MM-6 is called a port tube and is used to give your speaker extra bass without having to use a larger, more expensive woofer.
Most port tubes create an annoying noise that increases the noise level of your system and interferes with low frequencies. For this reason, most port tubes are located at the rear of the speaker, making it difficult to place the speaker close to a wall.
The port tube design on the MM-6 eliminates this problem, allowing you to place the speaker against a wall or other boundary without hearing noise or other problems caused by the port tube.

The 3D imaging waveguide allows you to hear a three-dimensional soundstage from a pair of stereo loudspeakers. By adapting the shape of the waveguide to the interactions of the HF and LF transducers, this waveguide creates a continuous stereo image that is wider, higher and deeper than the space in which the speakers are placed. It also means that if you're listening in a surround or immersive format, you'll be able to hear a detailed image of the sound between the speakers and all around you.
The Kali team have developed a 3D imaging waveguide to make mixing easier, but it also means that the MM-6 and other speakers that use it work better in acoustically challenging rooms and are more
more pleasant for long-duration listening

The MM-6 is equipped with Digital Signal Processing (DSP). The DSP controls the speaker settings, limiter function, crossover, limit equaliser and user-definable HF and LF clipping.

The LP series uses a woofer with an exceptionally large voice coil and magnet. This allows for greater linearity, resulting in exceptional dynamic range and clarity, as well as extended low-frequency response.
All this is achieved with minimal distortion.

The boundary compensation equalisers on the MM-6 allow you to place the speakers anywhere in your listening environment. Combined with the LF and HF trims, they ensure that the speakers sound their best wherever they are placed.

Features:

• Driver Type LF Woofer With Paper Diaphragm
• Driver Power Amplifier LF 40W
• HF Driver Type Textile Dome Tweeter
• HF 40W Pilot Power Amplifier
• Controls Volume, Trim
• Bluetooth Not
• ADAT Not
• Properties
• Frequency range 39 Hz - 25 kHz
• 6.5" bass driver
• 1" tweeter
• Bass reflex port Yes
• Crossover frequency 1500 Hz
• Colour Black
• Inputs and outputs
• Coaxial S/PDIF, Optical, RCA stereo Input, XLR
• AUX IN No
• XLR outputs
• USB No
• S/PDIF Yes
• Acoustics
• Amplifier configuration Bi-amp
• RMS power (Watt) 80
• RMS power 80 W
• Maximum sound pressure level (SPL) 115db
• Package
• Package quantity (pcs) 1
• Package contents
• Power cable, Manual, Remote control
• Power supply
• Power source
• 100V - 240V
• Accessories
• Remote control
• Yes
• Dimensions and weight
• Width (cm) 22.2
• Depth (cm) 26
• Height (cm) 35.9
• Net weight (kg) 7.05
• Made in China

KALI AUDIO - MM-6 - Pair of 6.5" bi-amplified multimedia monitors

The MM-6 is acoustically identical to the best-selling LP-6 studio monitor. Kali studio monitors can be found in the world's finest studios. Their accuracy, performance and detail make them the best choice for GRAMMY Award-winning musicians and producers, film and TV studios, and designers working in immersive formats such as Dolby Atmos. If you've listened to music, watched TV or been to the cinema in the last few years, you've probably heard something created by Kali Audio studio monitors.

This means that when you listen to your MM-6, you hear things exactly as the creators intended. Nothing is suppressed and nothing is drowned out. Everything is heard with perfect clarity, allowing you to immerse yourself in the experience and enjoy it to the full.

The MM-6 is designed to produce a continuous output of 85dB at 2.2 metres with a 20dB headroom. In practice, this means that the speaker has enough power for long-term listening at a safe level in most domestic environments.

A 20dB margin ensures that actual peaks in sound pressure levels, including instruments such as a bass drum and effects such as explosions or gunshots, can be accurately reproduced with minimal distortion.

The MM-6 is equipped with a limiter circuit to protect the loudspeaker from dangerous voltage levels. In other words, you don't have to worry about blowing up the speaker by playing too loud.

Dangerous voltages will be clearly audible as distortion, indicating that the speaker is receiving too much input. In this case, it is advisable to lower the volume of the playback equipment.

The opening below the woofer on the MM-6 is called a port tube and is used to give your speaker extra bass without having to use a larger, more expensive woofer.
Most port tubes create an annoying noise that increases the noise level of your system and interferes with low frequencies. For this reason, most port tubes are located at the rear of the speaker, making it difficult to place the speaker close to a wall.
The port tube design on the MM-6 eliminates this problem, allowing you to place the speaker against a wall or other boundary without hearing noise or other problems caused by the port tube.

The 3D imaging waveguide allows you to hear a three-dimensional soundstage from a pair of stereo loudspeakers. By adapting the shape of the waveguide to the interactions of the HF and LF transducers, this waveguide creates a continuous stereo image that is wider, higher and deeper than the space in which the speakers are placed. It also means that if you're listening in a surround or immersive format, you'll be able to hear a detailed image of the sound between the speakers and all around you.
The Kali team have developed a 3D imaging waveguide to make mixing easier, but it also means that the MM-6 and other speakers that use it work better in acoustically challenging rooms and are more
more pleasant for long-duration listening

The MM-6 is equipped with Digital Signal Processing (DSP). The DSP controls the speaker settings, limiter function, crossover, limit equaliser and user-definable HF and LF clipping.

The LP series uses a woofer with an exceptionally large voice coil and magnet. This allows for greater linearity, resulting in exceptional dynamic range and clarity, as well as extended low-frequency response.
All this is achieved with minimal distortion.

The boundary compensation equalisers on the MM-6 allow you to place the speakers anywhere in your listening environment. Combined with the LF and HF trims, they ensure that the speakers sound their best wherever they are placed.

Features:

• Driver Type LF Woofer With Paper Diaphragm
• Driver Power Amplifier LF 40W
• HF Driver Type Textile Dome Tweeter
• HF 40W Pilot Power Amplifier
• Controls Volume, Trim
• Bluetooth Not
• ADAT Not
• Properties
• Frequency range 39 Hz - 25 kHz
• 6.5" bass driver
• 1" tweeter
• Bass reflex port Yes
• Crossover frequency 1500 Hz
• Colour Black
• Inputs and outputs
• Coaxial S/PDIF, Optical, RCA stereo Input, XLR
• AUX IN No
• XLR outputs
• USB No
• S/PDIF Yes
• Acoustics
• Amplifier configuration Bi-amp
• RMS power (Watt) 80
• RMS power 80 W
• Maximum sound pressure level (SPL) 115db
• Package
• Package quantity (pcs) 1
• Package contents
• Power cable, Manual, Remote control
• Power supply
• Power source
• 100V - 240V
• Accessories
• Remote control
• Yes
• Dimensions and weight
• Width (cm) 22.2
• Depth (cm) 26
• Height (cm) 35.9
• Net weight (kg) 7.05
• Made in China