PWM Relay Switch 2 in 1 Remote Control Light Electronic On-off Relay Switch for RC Model Airplane Drone 5V Receiver DIY Parts

Specification:

2 outputs

1 channel of steering gear signal input, control 2 channels of electronic switches

This device does not need calibration and can be accurately compatible with remote control devices of various brands.

Only supports 5V voltage receiver, otherwise the module may be damaged. If the receiver and steering gear use high voltage system, you should add a step-down module to the relay

This remote switch remotely controls up to 2 electrical equipment on the aircraft model through a switch channel on the remote controlThis device uses receiver power supply, external power supply, only for controlled equipment

Application:

Remote control model rocket launch

Remote control model smoke control

Weapon system control like real machine

Aviation light control of model aircraft

Control of various remote switch systems

Typical application:

Connect

Insert the signal input cable into an idle receiver channel, which corresponds to a switch on the remote control.

Connect the control switch to the device

Trigger

(Take the throttle channel as an example) Turn the throttle lever on the remote control to full throttle, and a relay is closed (that is, the wiring at both ends is connected).      Turn the throttle lever on the remote control to half throttle, neither relay is closed (neither relay is connected).      Move the throttle lever on the remote control to the minimum throttle, and the other relay is closed (that is, the wiring at both ends is connected).

Note:

1. Due to the light and screen difference, the item's color may be slightly different from the pictures.

2. Please allow 1-3cm differences due to manual measurement.

Package includes:

1x PWM Relay Switch