Brand Name : ANNOY TOOLS
Certification : None
Origin : CN(Origin)
Working area : 30*18cm
Thickness : 12mm
Hole : 6mm
Machine : CNC3018/CNC3018PRO/CNC3018PLUS
A spoilboard is a workbench mounted above the router's table. It can protect the router table from damage as well as being an expendable surface that can participate in workholding.
Material: MDF (Medium-Density Fibreboard). MDF is very dense translating into more weight with enhanced strength and durability. Size is 30 x 18 x 1.2cm (11-4/5''x 7''x 1/2'')
Compatibility: Perfectly compatible with ALL 3018 series CNC router kit.
Application: Usually used when cutting or carving wooden materials. The MDF spoilboard is used as a base to cut on so that your CNC table is not damaged by the cutting tools. It can ensure the stability of the cutting material, thereby achieving more precise cutting.
Upgraded version, both sides can be used.
A spoilboard is a workbench mounted above the router's table. It can protect the router table from damage as well as being an expendable surface that can participate in workholding.
Material: MDF (Medium-Density Fibreboard). MDF is very dense translating into more weight with enhanced strength and durability. Size is 30 x 18 x 1.2cm (11-4/5''x 7''x 1/2'')
Compatibility: Perfectly compatible with ALL 30*18 series CNC router kit.
Easy to Use: Easy to install the spoilboard with pre-installed threaded holes (6mm) for fixture clamps. Can be used with most bench clamping systems.
Application: Usually used when cutting or carving wooden materials. The MDF spoilboard is used as a base to cut on so that your CNC table is not damaged by the cutting tools. It can ensure the stability of the cutting material, thereby achieving more precise cutting.
Make sure the MDF spoilboard is secured well to the machine bed.
Make sure the CNC material is clamped tight to the MDF spoilboard / machine bed, or you will get vibration, chatter, poor cut finish, and can possibly break your cutting bit.
Do not use any lubricant when you use an MDF spoilboard. It will swell and expand if it gets wet. So using spray or mist coolant or oils is not recommended.