Surges represent transients that might be induced in cables by lightning. By their nature,  fairly high energy charges may easily damage or upset unprotected electronics circuits  and components. Surges are not a new problem. Many companies have been testing their  products at various stages of the products life: design tests, qualification tests, production  tests and diagnostic tests. The advance of surge suppression devices and technique does  not lessen the importance of surge testing, but rather increases it, as the requirement to  reduce power consumption and to increase the operational speed of semiconductors has  become more demanding. In addition, the issue of surge testing is attracting renewed  interest since this form of immunity is now a must for almost all electronic products for  access to the global market.



FEATURES

Fully compliant with the requirements called for in the 2nd edition of IEC 61000-4-5 standard,  the LSS-15AX series simulators provide a testing facility for up to 15kV test voltage without  sacrificing safety and ease of use. The LSS-15AX simulators generate the two combination  pulses 1.2/50 µs (8/20 µs) and 10/700 µs (5/320 µs)

• Fully programmable and easy to use simulator that meets and far exceeds the IEC 61000-4-5 (2nd edition) requirements
• 15kV testing
• Advanced safety
• Flexible test sequencing with Program Mode

Highly repeatable and exact waveform. A new methodology has achieved an improvement in actual output waveform.

The times to half-value, to say, 50 microseconds, have very limited reduction when the pulses are coupled to the power line CDN, compared to the original waveform measured at the generator output itself.

 


Includes options below

• Infra-red remote controller (Model: 08-00006B) : A remote controller with the same function as the control panel of the simulator

• Insulating Transformer Unit (Model: TF-2302P )

1) Input voltage : Single phase 240VAC max.(50/60H)

2) Output current : 30A max.

3) Dielectric strength :

Primary to core: AC4kV (1 minute)

Secondary to core: AC4kV (1 minute)

Primary-secondary: AC4kV (1 minute)

4) Insulation resistance : 100MΩ or over at DC500V

5) Dimensions (mm) : 350(W) x 475(H) x 400(D)

6) Weight : Approx. 60 kg