Product Description
Electric Bicycle 24V/36V/48V EN06 LCD Display with SM/WP Plug for E-Bike ADE


Description:

1.brand new and high quality

2.Made of high quality material, durable and practical to use

3.Non-communications status (panel-controlled) When the current speed exceeds the speed limit, the PWM output will be shut down; when the current speed falls to lower than the speed limit, the PWM output will be activated and the driving speed will be set as the current speed +/-1km/h (only applies to assist power speed, not applicable to the handlebar speed).

4.Communications status (controller-controlled) The driving speed will be kept constant as the limited value. Error Value: +/-1km/h (applicable to both the assist power/handlebar speed)

5.The voltage is adjustable, the default is generally 36V

 

 

 

Specification:

Product Type：EN06 Display

Material: ABS

Color :Black

Voltage :24V/36V/48V

Cable length :180cm(Full length)/19cm(WP)

Plug :5 Pin

Weight :about 96g

Communication protocol: UART#2

 

Setting for LCD EN06

 

1.P01: Backlight Brightness (1: darkest; 3: brightest)

 

2.P02: Mileage Unit (0: KM; 1: MILE)

 

3.P03: Voltage Class 24V/36V / 48V/60V(Defualt 36V)

 

4.P04: Auto-Sleep Time

 

      (0: never, other valuemeansdisplaysleep interval) Unit: minute

 

5.P05: Power Assist Gear

 

      0/3 Gear Mode: Gear 1: 2V  Gear 2: 3V  Gear 3: 4V

 

      1/5 Gear Mode: Gear 1: 2V  Gear 2: 2.5V  Gear 3: 4VGear 4: 3.5V  Gear 5: 4V

 

6.P06: Wheel Diameter Unit: inch Precision: 0.1

 

7.P07: Magnet Steel Number (for Speed Test) Range: 1-100

 

8.P08: Speed Limit

 

      Range: 0-50km/h, parameter 50 indicates no speed limit.

 

   1. Non-communications status (panel-controlled)

Setting for LCD EN06

 

P01: Backlight Brightness (1: darkest; 3: brightest)

 

P02: Mileage Unit (0: KM; 1: MILE)

 

P03: Voltage Class 24V/36V / 48V

 

P04: Auto-Sleep Time

 

(0: never, other valuemeansdisplaysleep interval) Unit: minute

 

P05: Power Assist Gear

 

0/3 Gear Mode: Gear 1: 2V Gear 2: 3V Gear 3: 4V

 

1/5 Gear Mode: Gear 1: 2V Gear 2: 2.5V Gear 3: 4VGear 4: 3.5V Gear 5: 4V

 

P06: Wheel Diameter Unit: inch Precision: 0.1

 

P07: Magnet Steel Number (for Speed Test) Range: 1-100

 

P08: Speed Limit

 

Range: 0-50km/h, parameter 50 indicates no speed limit.

 

1. Non-communications status (panel-controlled)

 

When the current speed exceeds the speed limit, the PWM output will be shut down; when the current speed falls to lower than the speed limit, the PWM output will be activated and the driving speed will be set as the current speed ±1km/h (only applies to assist power speed, not applicable to the handlebar speed).

 

2. Communications status (controller-controlled)

 

The driving speed will be kept constant as the limited value.

 

Error Value: ±1km/h (applicable to both the assist power/handlebar speed)

 

Note: The above-mentioned values are measured by metric unit (kilometers). When the measuring unit is switched to imperial unit (mile), the speed value displayed on the panel will be automatically switched to corresponding imperial unit, however the speed limit value in the imperial unit interface won’t change accordingly.

 

P09: Direct Start / Kick-to-Start Setting

 

0: Direct Start

 

1: Kick-to-Start

 

P10: Drive Mode Setting

 

0: Power Assist – The specific gear of the assist drive decides the assist power value. In this status the handlebar does not work.

 

1: Throttle Mode – The vehicle is driven by the handlebar. In this status the power gear does not work.

 

2: Power Assist + Throttle – Electric drive does not work in zero-start status.

 

P12: Power Assist Intensity Range: 0-5

 

P13: Power Magnet Steel Number 5 / 8 / 12pcs

 

P14: Current Limit Value: 12A by default; Range: 1-20A

 

P15:Under-voltage:Choose according to your set

 

P16: ODO Zero-OutSetting for LCD EN06

 

P01: Backlight Brightness (1: darkest; 3: brightest)

 

P02: Mileage Unit (0: KM; 1: MILE)

 

P03: Voltage Class 24V/36V / 48V

 

P04: Auto-Sleep Time

 

(0: never, other valuemeansdisplaysleep interval) Unit: minute

 

P05: Power Assist Gear

 

0/3 Gear Mode: Gear 1: 2V Gear 2: 3V Gear 3: 4V

 

1/5 Gear Mode: Gear 1: 2V Gear 2: 2.5V Gear 3: 4VGear 4: 3.5V Gear 5: 4V

 

P06: Wheel Diameter Unit: inch Precision: 0.1

 

P07: Magnet Steel Number (for Speed Test) Range: 1-100

 

P08: Speed Limit

 

Range: 0-50km/h, parameter 50 indicates no speed limit.

 

1. Non-communications status (panel-controlled)

 

When the current speed exceeds the speed limit, the PWM output will be shut down; when the current speed falls to lower than the speed limit, the PWM output will be activated and the driving speed will be set as the current speed ±1km/h (only applies to assist power speed, not applicable to the handlebar speed).

 

2. Communications status (controller-controlled)

 

The driving speed will be kept constant as the limited value.

 

Error Value: ±1km/h (applicable to both the assist power/handlebar speed)

 

Note: The above-mentioned values are measured by metric unit (kilometers). When the measuring unit is switched to imperial unit (mile), the speed value displayed on the panel will be automatically switched to corresponding imperial unit, however the speed limit value in the imperial unit interface won’t change accordingly.

 

P09: Direct Start / Kick-to-Start Setting

 

0: Direct Start

 

1: Kick-to-Start

 

P10: Drive Mode Setting

 

0: Power Assist – The specific gear of the assist drive decides the assist power value. In this status the handlebar does not work.

 

1: Throttle Mode – The vehicle is driven by the handlebar. In this status the power gear does not work.

 

2: Power Assist + Throttle – Electric drive does not work in zero-start status.

 

P12: Power Assist Intensity Range: 0-5

 

P13: Power Magnet Steel Number 5 / 8 / 12pcs

 

P14: Current Limit Value: 12A by default; Range: 1-20A

 

P15:Under-voltage:Choose according to your set

 

P16: ODO Zero-Out

 

NOTE：

If you need to use the waterproof 5PIN connector (cable length 19CM), just remove the SM connector and you can use the 5PIN waterproof connector together with the controller with waterproof connector.

 

Package includes:

1*EN06 Display

1* instruction manual



43.jpg


  • We accept Credit Card, Debit Card and eCheck payments through PayPal.


  • Payment should be done within 7 days after the end of the Auction. Otherwise Unpaid Item Dispute will be filed with eBay.

  • We will ship out the item after comfirming the payment, appreciate your patience.

  • Please be sure your shipping address is correct before make a payment cause we ship items to your PayPal confirmed address only.


  • 100% Customer satisfaction is our top priority.


  • We back our products with a 30-DAY Return GUARANTEE.Customers should inspect item(s) and notify us within 30 days of any problems.


  • If you receive an incorrect,damaged,defective,or item not as described,please feel free to contact us for a partial/full refund or resend.
  • We will reply you within 24 hours.(except weekends and holidays)


Payment

  • We accept Credit Card, Debit Card and eCheck payments through PayPal.


  • Payment should be done within 7 days after the end of the Auction. Otherwise Unpaid Item Dispute will be filed with eBay.

Shipping

  • We will ship out the item after comfirming the payment, appreciate your patience.

  • Please be sure your shipping address is correct before make a payment cause we ship items to your PayPal confirmed address only.
Returns


  • 100% Customer satisfaction is our top priority.


  • We back our products with a 30-DAY Return GUARANTEE.Customers should inspect item(s) and notify us within 30 days of any problems.


  • If you receive an incorrect,damaged,defective,or item not as described,please feel free to contact us for a partial/full refund or resend.
Contact Us
  • We will reply you within 24 hours.(except weekends and holidays)


powered by tongtool

Am 31.05.2024 hat der Verkäufer die folgenden Angaben hinzugefügt:

DataCaciques