![]() |
![]() |
![]() |
|||
![]() |
|
![]() |
|||
![]() |
![]() |
![]() |
·2 layer PCB bard designing.
·Compliant with PCI express 2.0, 1.1 Specification
·1-slot PCI-E 1X to 3 slot 1X riser card with high speed USB 3.0 cable.
·High speed USB 3.0 shield cable is flexible for 1U,2U,3U chassis.
·Support 3 port high speed PCIe 1X card.
·Solid capacitor provide extra stable power supply for PCI-e card
Installation instructions:
When you use the adapter card, the computer needs to be turned off before they can plug the adapter card.
1. The first step, first of PCIe USB card plugged into the motherboard's PCIe slot.
2. Use USB3.0 data cable adapter to connect the ends of the two USB port. Plug in the power supply.
3.The third step: After completion of the above two steps, first in no hurry to insert your PCI-E card, start the computer to see if your computer has been identified to the riser card, if you did not find the card, repeat the above operation (Note: The first time to insert card to start the computer, into the system in general will be prompted to install new hardware, such as "PCI standard PCI-to-PCI bridge" , you need to wait for it to automatically install the complete, individual anti-virus software will prevent these files installation, note skipped), when your computer has been recognized the card,blue LED PCI slot on normal light, computer equipment manager in the system device will show an increase of several "PCI standard PCI-to-PCI bridge
4. After completing the above three steps, turn off the computer, plug in your PCI-E card, to be careful not to insert the contrary,
5. then boot into the system, install PCI-E Card Driver
Note:
·PCI card Do not insert anti, anti-insert can easily lead to burn out.
·Size for manual measurement, there may be a 0 to 2 cm error, belongs to the normal phenomenon.
·And due to the difference between different monitors, the picture may not reflect the actual color of the item!
Package includes:
1PCS x Mainboard
1PCS x PCI card
1PCS x USB cable