Product Description:
Plug: UK
Material: Stainless steel & plastic
Input Voltage: 220V
Power: 100W
1. Loosen the fixing screws.
2. Insert the triangular solder.
3. Tighten the fixing screw until the triangular soldering head is fixed.
Instructions:
1. Stick the metal foil on the back of the crack, fix the cracks
2. Use sponge sandpaper on the repair side to polish the cracks
3. Cut the correct repair mesh according to the size and shape of the crack.
4. Use the smoothing tool to heat the repair mesh and embed into the PP
5. Dissolve the electrode, reinforce the repair mesh, and finally fix it flat
Notice:
1. This product is heated from outside. It is normal that smoke occurs 3 to 5 minutes before preheating the electric heating wire. When warmed, it will not be displayed.
2. Be careful of danger, please disconnect the power when not in operation.
3. Hot air tools, soldering iron, soldering iron need to be placed in a stand when not in use.
4. When operating, do not apply excessive pressure on the soldering iron or collision with objects.
5. Regularly remove and clean the oxide layer on the tip of the soldering iron.
6. To keep the chip clean, when the tip cools, use a steel brush to wipe the PP.
Features:
Material: ABS, stainless steel, copper
Size: Soldering iron 7.9 x 1.6 inches (20 x 4 cm), Power cord 4.1 x 7.9 inches (1.4 m), Electrode length 7.9 x 2.8 inches (20 x 7 cm), Sponge sandpaper 3.9 x 2.8 inches (10 x 20 cm), Stainless steel mesh 6.7 x 1.5 inches (2 inches (2 inches (2 cm).
Product List:
1 x welding machine
2 x Soldering Iron Tip
1 x Stand
1 x Brush.
1 x Stainless Steel Mesh
1 x sponge sandpaper
20 white electrodes.
20 black electrodes.
5 x Metal Foil
1 x Dual Purpose Screwdriver
1 x Instruction