Flex 2.2"
Description:
A simple flex sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove.
The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend).
Connector is 0.1" spaced and bread board friendly. Check datasheet for full specifications.
Note: Please refrain from flexing or straining this sensor at the base. The usable range of the sensor can be flexed without a problem, but care should be taken to minimize flexing outside of the usable range. For best results, securely mount the base and bottom portion and only allow the actual flex sensor to flex.
CODE
#include
Servo myservo; // create servo object to control a servo
int potpin = 0; // analog pin used to connect the potentiometer
int val;// variable to read the value from the analog pin
void setup()
{
Serial.begin(9600);
myservo.attach(9); // attaches the servo on pin 9 to the servo object
}
void loop()
{
val = analogRead(potpin);
between 0 and 1023)
Serial.println(val);
val = map(val, 50, 300, 0, 179);
and 180)
myservo.write(val);
value
delay(15);
}
// reads the value of the potentiometer (value
// scale it to use it with the servo (value between 0
// sets the servo position according to the scaled
// waits for the servo to get there
Package Included:
1 X Flex Sensor 2.2"
Flex 4.5"
Description: A simple flex sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the originalNintendo Power Glove. I love the Nintendo Power Glove.The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend)Connector is 0.1" spaced and bread board friendly. Check datasheet for full specifications.
Note: Please refrain from flexing or straining this sensor at the base. The usable range of the sensor can be flexed without a problem, but care should be taken to minimize flexing outside of the usable range. For best results, securely mount the base and bottom portion and only allow the actual flex sensor to flex.
Features：
Angle Displacement Measurement
Bends and Flexes physically with motion device
Possible Uses
Simple Construction
Low Profile
Physical Therapy
Musical Instruments
Computer Peripherals
Medical Devices
Gaming (Virtual Motion)
Robotics
Electrical Specifications
Flat Resistance: 10K Ohms ±30%
Bend Resistance: minimum 2 times greater than the flat resistance at 180° pinch bend
Power Rating : 0.5 Watts continuous; 1 Watt Peak
Mechanical Specifications
Life Cycle: >1 million
Height: 0.43mm (0.017")
Temperature Range: -35°C to +80°
Package Included:
1 X Flex Sensor 4.5"
Flex 2.2"
Description:
A simple flex sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove.
The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend).
Connector is 0.1" spaced and bread board friendly. Check datasheet for full specifications.
Note: Please refrain from flexing or straining this sensor at the base. The usable range of the sensor can be flexed without a problem, but care should be taken to minimize flexing outside of the usable range. For best results, securely mount the base and bottom portion and only allow the actual flex sensor to flex.
CODE
#include
Servo myservo; // create servo object to control a servo
int potpin = 0; // analog pin used to connect the potentiometer
int val;// variable to read the value from the analog pin
void setup()
{
Serial.begin(9600);
myservo.attach(9); // attaches the servo on pin 9 to the servo object
}
void loop()
{
val = analogRead(potpin);
between 0 and 1023)
Serial.println(val);
val = map(val, 50, 300, 0, 179);
and 180)
myservo.write(val);
value
delay(15);
}
// reads the value of the potentiometer (value
// scale it to use it with the servo (value between 0
// sets the servo position according to the scaled
// waits for the servo to get there
Package Included:
1 X Flex Sensor 2.2"
Flex 4.5"
Description: A simple flex sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the originalNintendo Power Glove. I love the Nintendo Power Glove.The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend)Connector is 0.1" spaced and bread board friendly. Check datasheet for full specifications.
Note: Please refrain from flexing or straining this sensor at the base. The usable range of the sensor can be flexed without a problem, but care should be taken to minimize flexing outside of the usable range. For best results, securely mount the base and bottom portion and only allow the actual flex sensor to flex.
Features：
Angle Displacement Measurement
Bends and Flexes physically with motion device
Possible Uses
Simple Construction
Low Profile
Physical Therapy
Musical Instruments
Computer Peripherals
Medical Devices
Gaming (Virtual Motion)
Robotics
Electrical Specifications
Flat Resistance: 10K Ohms ±30%
Bend Resistance: minimum 2 times greater than the flat resistance at 180° pinch bend
Power Rating : 0.5 Watts continuous; 1 Watt Peak
Mechanical Specifications
Life Cycle: >1 million
Height: 0.43mm (0.017")
Temperature Range: -35°C to +80°
Package Included:
1 X Flex Sensor 4.5"