Blue board(Blue display)
Features:
No backlight, the display unit can be self-luminous
High resolution: 128 * 64
Viewing angle:> 160 °
Supports many control chip: Fully compatible with Arduino, 51 series, MSP430 series, STM32 / 2, CSR chip, etc.
Ultra-low power consumption: full screen lit 0.08W, 0.06W normal full-screen display of Chinese characters
Wide voltage support: without any modification, directly supports 3V ~ 5V DC
Working temperature: -30 ℃ ~ 70 ℃
Module volume (generous): 27.0MM * 27.0MM * 4.1MM
Minimum occupancy on Earth IO port display: The IIC/I2C communication, as long as the two IO ports will be able to drive!
Driver IC: SSD1306
No font: take the word with modulo software
Package include:
1X Blue 0.96" IIC I2C 128X64 OLED LCD Display Module Arduino/STM32/AVR/51
Red board(Blue display)
Product Overview
OLED is an organic light-emitting diode, also known as organic point laser display. OLED display has self-luminous properties, using a very thin coating of organic materials and a glass substrate, and these materials will emit light when current passes through it.
The OLED display has a wide viewing angle and low power consumption. It also has the characteristics of self-illumination, no backlight need (note it will be bright only when power on, and the driver and wiring are correct), high contrast, thin thickness, wide viewing angle, fast response, can be used for flexing surface, wide temperature range, simple structure and process.
This module mainly uses a 0.96-inch OLED blue screen driven by the SSD1306, and communicates with the microcontroller using I2C communication.
The module comes with 4 positioning holes for you to secure the module to other devices.
Features:
1)Internal driver chip: SSD1306
2)High resolution: 128 * 64
3)Communication method: IIC and I2C communication
4)Wide viewing angle: greater than 160°
5)Low power consumption: 0.06W in normal display
6)Wide power supply range: DC 3.3-5V
7)Operating temperature range: -30℃ to 70℃
8)Service life: no less than 16,000 hours
9)Brightness and contrast can be controlled by program instructions
Package include:
1X 0.96" IIC I2C Serial 128X64 OLED Blue LCD Display SSD1306 for Arduino
Blue board(Blue display)
Features:
No backlight, the display unit can be self-luminous
High resolution: 128 * 64
Viewing angle:> 160 °
Supports many control chip: Fully compatible with Arduino, 51 series, MSP430 series, STM32 / 2, CSR chip, etc.
Ultra-low power consumption: full screen lit 0.08W, 0.06W normal full-screen display of Chinese characters
Wide voltage support: without any modification, directly supports 3V ~ 5V DC
Working temperature: -30 ℃ ~ 70 ℃
Module volume (generous): 27.0MM * 27.0MM * 4.1MM
Minimum occupancy on Earth IO port display: The IIC/I2C communication, as long as the two IO ports will be able to drive!
Driver IC: SSD1306
No font: take the word with modulo software
Package include:
1X Blue 0.96" IIC I2C 128X64 OLED LCD Display Module Arduino/STM32/AVR/51
Red board(Blue display)
Feature:
1) Internal driver chip: SSD1306
2) High resolution: 128 * 64
3) Communication method: IIC communication
4) Wide viewing angle: greater than 160°
5) Low power consumption: normal display 0.06W
6) Wide power supply range: DC 3.3-5V
7) Operating temperature range: -30℃ to 70℃
8) Service life: not less than 16000 hours
9) Brightness and contrast can be controlled by program instructions
Interface Description
1.GND: Power ground
2. VCC: Positive power supply (3.3~5V)
3.SDA: l2C data cable
4.SCL: Final line at l2
Package include:
1X 0.96" IIC I2C Serial 128X64 OLED Blue LCD Display SSD1306 for Arduino