300mA 18W
Dimensions: L41mm W26mm H10mm
Input voltage: DC 9 ~ 32V (depending on lamp beads may be connected in series)
Output Current: 300mA
Output Power : 18W
Their power consumption: <1W
Output channels: three-channel
6A 72W
Dimensions: L36mm W18mm H6mm
Input voltage: DC 9 ~ 32V (depending on lamp beads may be connected in series)
Output Current: <6A
Output Power : 72W
Their power consumption: <1W
Output channels: three-channel
12A 144W
Dimensions: L54mm W30mm H17mm
Input voltage: DC 9 ~ 24V (depending on lamp beads may be connected in series)
Output Current: <12A
Output Power : 144W
Their power consumption: <1W
Output channels: three-channel
Product Features:
Protocol: standard DMX512 protocol (1990), Qian capacitive strong;
Transmission: RS485 differential transmission, with high resistance to dry worries, transmission distance, easy wiring, etc.;
CC: Within a precision constant current circuit, ensuring LED high light efficiency, low light decay.
Lightning: with anti-lightning, anti-static, the circuit is stable and reliable.
Grayscale 0-100% dimming, 256 * 256 * 256 grayscale;
Power supply; DC power supply.
Power-on: boot no impact (instantaneous power LED body), the protective effect of the LED
Product Features:
Series work:
Each module series, no need to set the address, the address is automatically assigned sequentially, easy to use, the distance between the drive signals up to 100 meters, which can be accessed 170 driver board
Parallel work:
Each module and then, when you need to add every 32 amplifier modules (theoretical value of this quantity, the actual project site please test subject), each module settings alone address (available to write code written);
Mode:
Connected with DMX512 controller, the controller will follow the effect of changes
When not associated DMX512 controller will automatically run the built-in effects (colorful hopping, gradient); in serial mode, when not connected to the main controller, the first decoder can automatically becomes the master, synchronize online change;
Applications:
Mainly used in high-power full-color wall wash lights, spot lights, buried lights, underwater lights, stage lights, tunnel lights.
Module port description:
Left of the D +, D-, GND differential input line.
The right side of D +, D-, GND differential output lines, the next line is output to the communication module, when a plurality of modules connected in series to the next module is connected to the D + and D-
The left AC, AC / DC power input, AC and DC common;
The right side of V +, R-, G-, B-is a lamp output terminal connected LED lamps, V + is the LED anode common terminal, R, G, B light bead cathode respectively connected to the panel R-, G-, B- end
DMX512 3CH Controller
Automatically adapt to DC5V-24V
Standard DMX512 Signal
5A each channel
RGB 3 Channel ,Common Anode
OutPut: CMOS Drain-Open output
Package included:1PC