Blaze King Wood Stove Convection Axial Spider Fan (150-0175-C)

Blaze King wood stove spider mount axial fan replacement. Desiged to replace the axial fans in the Z1714 and Z2514 fan kits.  Replaces worn, damaged or noisey fans and helps to improve the heating efficiency of your stove.  To service the blowers, you can follow the removal and installation process outlined in the fan kit installation instructions.

*The fan blade is 4″ diameter.  The brackets are 4″ apart from center of screw hole to center of screw hole. *

Blaze King 150-0175-C Fan Installation Instructions:

1. Unplug the unit's power cord.
2. Locate the fan motors by following the instructions outlined in the fan kit installation instructions  See link above. Free-Standing Stoves: It may be necessary to remove the rear and side panels to gain access to this area. Inserts: Most often the unit needs to be pulled out of the firebox in order to access this location.
3. Follow the power wires coming off of the existing motor & disconnect them at the first connection (Pay attention to the orientation of the wires and connection location. Often the power wire leads will come from the motor. Other times, there will be two lead wires that run from the unit and connect to tabs on the motor).
4. Locate the 4 fasteners attaching the axial fan housing to the unit and remove them.
5. Position the new fan in place and reattach using the previously removed fasteners.
6. Reconnect the wires (Pay attention to the wire location).
7. Free-Standing Stoves: Reinstall any previously removed panels. Inserts: Reposition the insert back into the firebox cavity.
8. Plug in the unit's power cord.

Product Details