Blaze King Wood Stove Crossflow Fan (150-0710-R) | Right-Side

Blaze King wood stove crossflow fan (Right Side). This fan is designed to circulate room air around the back and top of the stove / insert.  As this room air travels around the unit it becomes heated.  This increases the efficiency of the stove by allowing more heat to be transferred into the room and less heat to be lost through the exhaust. 

Blaze King 150-0710-R Blower Installation Instructions:

1. Unplug the unit's power cord.
2. Locate the blower motor. Free-Standing Stoves: It may be necessary to remove the rear and side panels to gain access to this area. Inserts: Most often the unit needs to be pulled out of the firebox in order to access this location.
3. Follow the power wires coming off of the existing motor & disconnect them at the first connection (Pay attention to the orientation of the wires and connection location. Often the power wire leads will come from the motor. Other times, there will be two lead wires that run from the unit and connect to tabs on the motor).
4. Locate the fasteners attaching the fan housing to the unit and remove them.
5. Position the new blower in place and reattach using the previously removed fasteners.
6. Reconnect the wires (Pay attention to the wire location).
7. Free-Standing Stoves: Reinstall any previously removed panels. Inserts: Reposition the insert back into the firebox cavity.
8. Plug in the unit's power cord.

Product Details