Premium Hand-made Guitar cable
Color: Black
Cable: MOGAMI W2524 Guitar Cable, Made in Japan
Connector: 1/4 (6.35mm) SWITCHCRAFT 280 CONNECTOR, Made in USA, just Classic, Good quality stuff that last a long time !
If you are looking for something longer than 15m(49ft), you are welcome to sent me a message for making a long cable
All Component were purchased from official distributor channel to ensure authenticity and quality. Hand Assemble with care and a passion for music.
Mogami W2524
Most musical instrument sound pick-ups, for example those in electric guitars, are comprised of high impedance circuits driven mainly by voltage, with very little electrical current flow. That is why handling noise (microphonics) can be a problem for guitar cables. Microphonic noise is caused by the minute voltage generated when a cable is flexed, stepped on, etc. Guitar cables must be designed to prevent this, so a conductive PVC layer is placed under the shield conductor to drain away this voltage. Note: This conductive layer must be stripped back when wiring, or a partial short will result.
ELECTRICAL & MECHANICAL CHARACTERISTICS
Part No. | W2524 | ||
DC Resistance at 20°C | Inner Conductor | 0.033Ω/m(0.010Ω/Ft) | |
Shield Conductor | 0.014Ω/m(0.0043Ω/Ft) | ||
Capacitance at 1kHz, 20°C | 130pF/m (39.7pF/Ft) | ||
Inductance | 0.2µH/m (0.061µH/Ft) | ||
Electrostatic Noize* | 0.15mV Max. | ||
Electromagnetic Noise At 10kHz* | 0.07mV Max. | ||
Microphonics* | 0.3mV Max | ||
Voltage Breakdown | Must withstand at DC 500V/15sec. | ||
Insulation Resistance | 100000 MΩ × m Min. at DC 500V , 20°C | ||
Flex Life | 15,000 cyles | ||
Tensile Strength (26°C, 65%RH) | 578 N | ||
Emigration | Non-emigrant to ABS resin | ||
Applicable Temperature | -20°C‾ +60°C(-4°F‾ +140°F) |