DIY Router Table Kit
Transform your Ryobi R18TR-0 Trim router into a portable,
compact desktop router table with one of the kits available.
The process to make the router table takes hours not days to
complete as the inserts and template provided cut down on the time required.
There are two available kits to purchase.
Kit Option 1 includes..
·
The router base plate for your R18TR-0 trim router + 4 screws for mounting
·
Two templates for routering the centre hole and
the surrounding base level with the table.
·
2 BA screws and 4 centre hole inserts (10mm,
16mm, 24mm, 30mm)
·
2 Starter Pins (to assist with introducing
material to the cutter)
·
Instructions & Dimensions sheets
Kit Option 2 includes..
·
The router base plate for your R18TR-0 trim router + 4 screws for mounting
·
Two templates for routering the centre hole and
the surrounding base level with the table.
·
2 BA screws and 4 centre hole inserts (10mm,
16mm, 24mm, 30mm)
·
2 Starter Pins (to assist with introducing
material to the cutter)
·
Dust extraction housing + bolts (int. diameter
35mm, ext. diameter 39mm)
·
4 T-Track knobs with track inserts * see notes below
·
T-Track Template (Produces a 20mm width by 121mm
length channel for the rear tracks) * See notes below
·
Instructions & Dimensions sheets
YOU WILL REQUIRE
THE FOLLOWING ITEMS
· R18TR-0 Trim Router
·
Electric Screwdriver, various drill bits, impact
driver or screwdrivers
·
Trend or compatible 16mm guide bush & 12mm
Straight Cutter.
·
Aluminium T-Tracks & Aluminium equal for
dust extraction/rear guide rail.
·
Screws & glue (if required) for table
assembly.
·
MDF or Plywood Sheet (18mm to 24mm) &
Additional timber for supports
·
Belt sander or files for rounding the T-Track
profiles.
NOTES
I opted to make the design for this router table out of 18mm
MDF but you can opt for 18-24mm MDF or plywood as alternatives. If you decide
to build in 18mm I would recommend a T-Track profile of 20mm width 9.5mm depth.
I can provide links to the profile used in my design. If you use a different
track profile please message me as the track inserts and knobs may need
modification before dispatch. The aluminium equal I used is 500mm length by 2mm
thickness but again if you opt for a thicker profile please advise so I can
ensure the knobs supplied will fit your profiles and tracks. Tiny variations in
thickness can affect fitment so please check prior to ordering.
PLEASE NOTE YOU ARE PURCHASING ONE OF THE
ABOVE KITS ONLY.
NO OTHER ITEMS OR ACCESSORIES SHOWN IN
THE PICTURES ARE INCLUDED