Mercury Ignition coil
package includes:3PCS
Connector: 4 pins
Replaces Part numbers:
114-7509 827509A1
827509A3 827509A4
827509A7 827509A8
827509A9 827509A10
827509T7 AMW-3454
Fitment:
MERCURY (1996-2007 (30-300HP)
FORCE (1996-1999 (40,50,75,90 & 120HP)
FEATURE:
EASY INSTALLATION, GOOD WORKING CONDITION.
STABLE CHARACTERISTICS, HIGH RELIABILITY.
PERFECTLY REPLACE FACTORY OEM PARTS.
Product:
Chrysler, Force, Gamefisher, Mercury, CDM Module 2/3/4/6 Cyl
How to install ignition CDM module 114-7509?
1. Disconnect and clean all engine and battery ground wires
2. Disconnect the old CDM Module and remove the high tension coil wire from the spark plug
3. Unbolt and remove the old CDM Module. (Note the direction of the spark plug wire)
4. Check for dc voltage on the kill (stop) wires (usually black/Yellow) with the key switch in the on and off position.
5. Apply a slight amount of dielectric grease to the seal area of the wire connector from the engine harness
6. Apply a slight amount of dielectric grease to the outside of the new spark plug wire and thread the spark plug wire into the new CDM Mod
7. Bolt the new CDM Module onto the engine(orient the new CDM Module so that the spark plug wire is pointed in the same direction as the original)
8. Plug in the connector from the wire harness into the new CDM Module and connect the spark plug wire to the spark plug
Hello
We will take responsibility for the order! Please do not request a return or refund directly!Thanks!
Please contact us first if the following or anything happens:
1. Not delivered in time
2. Arrived damaged
3. Does not match the description or picture
4. The size does not fit
5. Unusable or defective
6. Wrong item sent
7. Returned for refund
8. Use faster shipping service
9. Change address
10. Any other questions...
Please contact us on Ebay first!We will give you a satisfactory solution!
Have a nice day!