Description:
The MS14N is the 2nd generation Dragino mother board. It lets you embed Linux into your MCU projects. It is a low cost, open hardware Linux motherboard for micro-controllers. It runs open source linux system, has USB host port and has full Ethernet and 802.11 b/g/n WiFi capabilities.
The goal of the MS14N is to solve the connectivity problem and greatly enhance micro-controller products such as the Arduino.
Features:
Open Source OpenWrt Inside -- preload with Arduino Yun firmware.
Open Hardware Design
Support Wifi AP, cleint, mesh mode
Modular Design
Low Power Consumption
Full SSH access
Managed by Web GUI, SSH or Serial
Various firmware upgrade methods
Remote programm / upgrade and AVR daughter aboard
Specifications:
400Mhz ar9331 processor
64MB RAM
16MB Flash
OpenWrt Linux Distribution
DC Input: 9 ~ 12v or 5V
IEEE 802.11b/g/n
Frenquency Band: 2.4 ~ 2.462GHz
Chip Antenna or External antenna
14 positions sensor connector
2 x RJ45 ports
USB 2.0 Host
Application:
remote control of robots, data logging, web applications for data presentation, mesh networking over WiFi and many more
Packing Included:
1 X MS14S IoT Sensor Appliance with Arduino Yun firmware
1 X M32 Arduino IoT Module x 1 (put inside the MS14-S)
1 X 14 position external screw terminal
1 X 12V Power Adapter x 1 (AU, EU or US type depends on buyer's country)
The MS14N is the 2nd generation Dragino mother board. It lets you embed Linux into your MCU projects. It is a low cost, open hardware Linux motherboard for micro-controllers. It runs open source linux system, has USB host port and has full Ethernet and 802.11 b/g/n WiFi capabilities.
The goal of the MS14N is to solve the connectivity problem and greatly enhance micro-controller products such as the Arduino.
Features:
Open Source OpenWrt Inside -- preload with Arduino Yun firmware.
Open Hardware Design
Support Wifi AP, cleint, mesh mode
Modular Design
Low Power Consumption
Full SSH access
Managed by Web GUI, SSH or Serial
Various firmware upgrade methods
Remote programm / upgrade and AVR daughter aboard
Specifications:
400Mhz ar9331 processor
64MB RAM
16MB Flash
OpenWrt Linux Distribution
DC Input: 9 ~ 12v or 5V
IEEE 802.11b/g/n
Frenquency Band: 2.4 ~ 2.462GHz
Chip Antenna or External antenna
14 positions sensor connector
2 x RJ45 ports
USB 2.0 Host
Application:
remote control of robots, data logging, web applications for data presentation, mesh networking over WiFi and many more
Packing Included:
1 X MS14S IoT Sensor Appliance with Arduino Yun firmware
1 X M32 Arduino IoT Module x 1 (put inside the MS14-S)
1 X 14 position external screw terminal
1 X 12V Power Adapter x 1 (AU, EU or US type depends on buyer's country)
