Genuine OEM GM
100% Original New Old Stock! 10239647
BRAND NEW BOWTIE REMOTE!

GM 15725423 Transmitter, Remote Control Door Lock
1991-1996 GM
10239647 15725423 15731442 15955702 15657587 25559364  
25555951 25609144 15955516 15955515  15692636 15955702
all the above Replaced By 15725423

ORIGINAL, OEM GM Remote!
brand new never used genuine NEW OLD STOCK.
new batteries installed and tested with a 
strong 315 MHz signal for the USA market.
in stock and ships free today!

remote has to be programmed before use, look below:
PROGRAMYOURREMOTE.COM FOR PROGRAMMING.
return fees apply, send my your VIN and I'll confirm 
the part fits your vehicle.


1995-1996 Chevrolet Blazer

6 Cyl 4.3L

2 DOOR, 4 DOOR

1994-1995 Chevrolet Camaro

6 Cyl 3.4L, 6 Cyl 3.8L, 8 Cyl 5.7L

2 DOOR, CONVERTIBLE

1994-1996 Chevrolet Caprice

8 Cyl 4.3L, 8 Cyl 5.7L

CLASSIC 4 DOOR, LS 4 DOOR

1996 Chevrolet Cavalier

4 Cyl 2.2L, 4 Cyl 2.4L

2 DOOR, 4 DOOR, CONVERTIBLE, LS 4 DOOR, Z24 2 DOOR

1996 Chevrolet Express

6 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 6.5L Diesel, 8 Cyl 7.4L

1 TON CARGO EXPRESS, 1 TON COMMERCIAL/RECREATIONAL VEHICLE EXPRESS, 1 TON PASSENGER, 1/2 TON CARGO EXPRESS, 1/2 TON PASSENGER EXPRESS, 3/4 TON CARGO EXPRESS, 3/4 TON PASSENGER EXPRESS

1992-1995 Chevrolet G10

6 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L

1 TON CARGO, 1 TON PASSENGER, 1/2 TON CARGO, 1/2 TON PASSENGER, 3/4 TON CARGO, 3/4 TON PASSENGER

1992-1995 Chevrolet G20

6 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 6.2L Diesel, 8 Cyl 6.5L Diesel

3/4 TON CARGO, 3/4 TON PASSENGER

1992-1995 Chevrolet G30

6 Cyl 4.3L, 8 Cyl 5.7L, 8 Cyl 6.2L Diesel, 8 Cyl 6.5L Diesel, 8 Cyl 7.4L

1 TON CARGO, 1 TON PASSENGER

1994-1996 Chevrolet Impala

8 Cyl 5.7L

CLASSIC 4 DOOR, LS 4 DOOR

1995-1996 Chevrolet Lumina

6 Cyl 3.1L, 6 Cyl 3.4L

LS, LS 4 DOOR, LUMINA, MONTE CARLO

1995-1996 Chevrolet Monte Carlo

6 Cyl 3.1L, 6 Cyl 3.4L

LS, LS 4 DOOR, LUMINA, MONTE CARLO

1991-1994 Chevrolet S10

4 Cyl 2.2L, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3L

2 DOOR, 4 DOOR, PICKUP

1995-1996 Chevrolet Suburban

8 Cyl 5.7L, 8 Cyl 6.5L Diesel, 8 Cyl 7.4L

1/2 TON, 3/4 TON

1995-1996 Chevrolet Tahoe

8 Cyl 5.7L, 8 Cyl 6.5L Diesel

CLASSIC 2 DOOR 1/2 TON, CLASSIC 4 DOOR 1/2 TON

1992-1995 GMC G1500

6 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L

1/2 TON CARGO, 1/2 TON PASSENGER

1992-1995 GMC G2500

6 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L

3/4 TON CARGO, 3/4 TON PASSENGER

1992-1996 GMC G3500

6 Cyl 4.3L, 8 Cyl 5.7L, 8 Cyl 6.5L Diesel, 8 Cyl 7.4L

1 TON CARGO, 1 TON CARGO CLASSIC, 1 TON CARGO VAN, 1 TON COMMERCIAL/RV CLASSIC, 1 TON PASSENGER, 1 TON PASSENGER CLASSIC

1992-1996 GMC Jimmy

6 Cyl 4.3L

2 DOOR, 4 DOOR

1991 GMC S15

6 Cyl 4.3L

2 DOOR, 4 DOOR

1996 GMC Savana

6 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 6.5L Diesel

1/2 TON PASSENGER SAVANA, 3/4 TON CARGO SAVANA, 3/4 TON PASSENGER SAVANA

1991-1993 GMC Sonoma

4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3L

PICKUP

1995-1996 GMC Suburban

8 Cyl 5.7L, 8 Cyl 6.5L Diesel, 8 Cyl 7.4L

1/2 TON, 3/4 TON

1991 GMC Syclone

6 Cyl 4.3L

PICKUP

1992-1993 GMC Typhoon

6 Cyl 4.3L

2 DOOR, 4 DOOR

1995-1996 GMC Yukon

8 Cyl 5.7L, 8 Cyl 6.5L Diesel

CLASSIC 2 DOOR 1/2 TON, CLASSIC 4 DOOR 1/2 TON

1996, 1991-1994 Oldsmobile Bravada

6 Cyl 4.3L

BRAVADA



1994 Chevrolet G20 Key Fob Remote Programming Instructions
Obtain all remote transmitters for this vehicle.

1. Open the driver's door.

2. Turn the ignition key ON (ON is the position just shy of cranking the engine).

3. Press and hold the programming/override button (located under or at the bottom of the driver's side dash). In approximately 20 seconds the system will start to cycle the door locks and the siren (if equipped) 3 times to indicate the system has entered the transmitter learn mode (DO NOT RELEASE THE PROGRAMMING/OVERRIDE BUTTON).

4. Press the #1 button (top left button) on the unprogrammed transmitter. The system will respond by cycling the door locks and the siren (if equipped) one time to indicate the transmitter has been learned.

5. All other transmitters (up to four) also need to be programmed at this time.

6. Programming is now complete, let go of the programming/override button and turn ignition off to exit learn mode. Test all remotes for proper programming.


g20:

Connect pin "G" on the diagnostic socket to ground using a wire.
The doors then open and close automatically, so you are in programming mode.
Press any button on the key, opening and closing repeats itself.
The same for other keys!
unplug wire.
Complete!
Check the function of the key